EUTECROD 1030FC

Hazard statements (CLP)

H302, H330, H341, H350, H360FD, H372, H411

Code

Statements

H302

Harmful if swallowed

SECTION 2: Hazards identification

GHS Classification EMERGENCY OVERVIEW: Odorless coated wire. Chemically stable and inert. Does not pose a fire hazard. Flames used for brazing can ignite combustibles. Refer to American National Standard Z49.1 for fire prevention during welding. HEALTH DANGER: Toxic. Danger of serious damage to health by exposure through inhalation.

Principle Routes of Exposure

Primary route of entry is the respiratory system when used. Other possible routes are eyes, ingestion, and/or skin contact.

Potential health effects

EYES: Inert foreign body hazard only. SKIN: Prolonged contact may result in rashes/irritations due to drying of the skin and/or mechanical abrasion related to skin-to-clothing contact or skin-to-skin contact. May cause allergic skin reaction. INGESTION: No adverse health effects known by this route during proper industrial handling. INHALATION: Exposure to fumes may be deadly.

Acute Health Hazards

see Section 11

Health hazards

see Section 11 WARNING This product contains or produces a chemical known to the State of California to cause birth defects (or other reproductive harm) and cancer. (California Health & Safety Code 25249.5 et seq.). WARNING - CONTAINS CADMIUM do not breathe welding fumes and gases; they may dangerous to your health. Always use adequate ventilation and use appropriate personal protection equipment. Exposure to fumes may be deadly. CARCINOGENICITY CADMIUM - Cadmium is listed as being carcinogenic to humans on IARC and NTP lists, and is listed by NIOSH as being a potential occupational carcinogen (with no further categorization). WELDING FUMES (not otherwise specified) are considered to be carcinogenic defined with no further categorization by NIOSH and IARC. DANGER: Very toxic, Toxic, Harmful, Dangerous for the environment

R-phrase(s)

May cause cancer. May impair fertility. May cause harm to the unborn child. Harmful in contact with skin and if swallowed. Very toxic by inhalation. Toxic: danger of serious damage to health by prolonged exposure through inhalation and if swallowed. Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Possible risks of irreversible effects. Brazing/welding vapours and fumes from brazing/welding may cause metal fumes fever. Symptoms can appear 4 to 12 hours after (headache, dizziness, dryness, cough, nausea and fever). May cause irritation by prolonged inhalation of brazing/welding fumes.

Hazard categories

Acute toxicity: Acute Tox. 4 Acute toxicity: Acute Tox. 1 Germ cell mutagenicity: Muta. 2 Carcinogenicity: Carc. 1B Reproductive toxicity: Repr. 1B Specific target organ toxicity - repeated exposure: STOT RE 1 Hazardous to the aquatic environment: Aquatic Chronic 2 Acute toxicity: Acute Tox. 4 Skin corrosion/irritation: Skin Irrit. 2 Serious eye damage/eye irritation: Eye Irrit. 2 Reproductive toxicity: Repr. 1B

Hazard statements

Harmful if swallowed. Fatal if inhaled. Suspected of causing genetic defects. May cause cancer. Harmful if swallowed. Causes skin irritation. Causes serious eye irritation. May damage fertility. May damage the unborn child. H302 Harmful if swallowed. H330 Fatal if inhaled. H341 Suspected of causing genetic defects. H350 May cause cancer. H360FD May damage fertility. May damage the unborn child. H372 Causes damage to organs through prolonged or repeated exposure. H411 Toxic to aquatic life with long lasting effects.

Hazard pictograms

GHS06 - GHS08 – GHS09 Hazardous components Cadmium (non-pyrophoric) Boric acid

Precautionary statements

P285 In case of inadequate ventilation wear respiratory protection. P314 Get medical advice/attention if you feel unwell. P280 Wear protective gloves/protective clothing/eye protection/face protection. P202 Do not handle until all safety precautions have been read and understood. P260 Do not breathe dust/fume/gas/mist/vapours/spray. P501 Dispose of contents/container to waste treatment facility in accordance with local and national regulations.

Supplemental label elements

As an article the product does not need to be labeled in accordance with EC-directives or respective national laws. Although this product does not require a hazard warning label, we recommend that the safety advice should be observed. Metals in massive form, alloys, mixtures containing polymers and mixtures containing elastomers do not require a label according to this Annex (Annex I GHS), if they do not present a hazard to human health by inhalation, ingestion or contact with skin or to the aquatic environment in the form in which they are placed on the market, although classified as hazardous in accordance with the criteria of this Annex. Instead, the supplier shall provide the information to downstream users or distributors by means of the SDS. SECTION 2 NOTES: Before using this product, contact your doctor to determine if exposure to product or use of this product will aggravate your medical conditions.