EUTECROD 1020FC

Hazard statements (CLP)

H302, H315, H319, H360FD

Code

Statements

H302

Harmful if swallowed

SECTION 2: Hazards identification

EMERGENCY OVERVIEW Chemically stable and inert. Does not pose a fire hazard as shipped. Non-Flammable Flames used for brazing can ignite combustibles. Refer to American National Standard Z49.1 for fire prevention during welding. These products as shipped are non-hazardous, nonflammable, non-explosive, and non-reactive. In case of fire, Use NIOSH/MSHA self contained breathing apparatus.

Principle Routes of Exposure

Primary route of entry is the respiratory system. Other possible routes are eyes and/or skin contact

Potential health effects

EYES: Inert foreign body hazard only. SKIN: Rashes/irritations due to drying of the skin and/or mechanical abrasion related to skin-to-clothing contact or skin-to-skin contact. Spatter and flames from brazing may cause burns. INGESTION: Not an expected route of entry, but if ingested product could cause serious injury. INHALATION: Danger of serious damage to health by prolonged exposure through inhalation.

Acute Health Hazards

see Section 11

Health hazards

see Section 11 WARNING This product contains or produces a chemical known to the State of California to cause birth defects (or other reproductive harm) and cancer. (California Health & Safety Code 25249.5 et seq.). WARNING: avoid breathing welding fumes and gases; they may dangerous to your health. Always use adequate ventilation and use appropriate personal protection equipment. CARCINOGENICITY WELDING FUMES (not otherwise specified) are considered to be carcinogenic defined with no further categorization by NIOSH and IARC. Brazing/welding vapours and fumes from brazing/welding may cause metal fumes fever. Symptoms can appear 4 to 12 hours after. (headache, dizziness, dryness, cough, nausea and fever). May cause irritation by prolonged inhalation of brazing/welding fumes. Package Labeling:

Hazard pictograms

GHS07- GHS08

Contains

alkali fluorosilicates(K) and Boric Acid

Hazard statements

H302 Harmful if swallowed. H315 Causes skin irritation. H319 Causes serious eye irritation. H360FD May damage fertility. May damage the unborn child.

Precautionary statements

P285 In case of inadequate ventilation wear respiratory protection. P314 Get medical advice/attention if you feel unwell. P280 Wear protective gloves/protective clothing/eye protection/face protection. P202 Do not handle until all safety precautions have been read and understood. P260 Do not breathe dust/fume/gas/mist/vapors/spray. P501 Dispose of contents/container to waste treatment facility in accordance with local and national regulations. CAUTION: Limited evidence of carcinogenic effect (welding fumes). May cause sensitization by skin contact Brazing/welding fumes and vapors may cause metal fume fever (headache, dizziness, dryness, cough, nausea, and fever) and these symptoms may appear 4-12 hours after exposure

Supplemental label elements

As an article the product does not need to be labeled in accordance with EC-directives or respective national laws. Although this product does not require a hazard warning label, we recommend that the safety advice should be observed. Metals in massive form, alloys, mixtures containing polymers and mixtures containing elastomers do not require a label according to this Annex (Annex I GHS), if they do not present a hazard to human health by inhalation, ingestion or contact with skin or to the aquatic environment in the form in which they are placed on the market, although classified as hazardous in accordance with the criteria of this Annex. Instead, the supplier shall provide the information to downstream users or distributors by means of the SDS. SECTION 2 NOTES: Before using this product, contact your doctor to determine if exposure to product or use of this product will aggravate your medical conditions. Spatter and flames from brazing may cause burns and start fires.