Carbon Black Feedstock

Hazard statements (CLP)

H332, H350, H361d, H373, H410

Code

Statements

H332

Harmful if inhaled

SECTION 2: Hazards identification

This material is hazardous according to regulatory guidelines (see (M)SDS Section 15).

2.1 Classification of the substance or mixture

Acute inhalation toxicant: Category 4. Carcinogen: Category 1B. Reproductive toxicant (developmental): Category 2. Specific target organ toxicant (repeated exposure): Category 2. Acute aquatic toxicant: Category 1. Chronic aquatic toxicant: Category 1.

Signal word

Danger

Hazard statements

Health: H332: Harmful if inhaled. H350: May cause cancer. H361d: Suspected of damaging the unborn child. H373: May cause damage to organs through prolonged or repeated exposure. (Blood, Liver, Thymus).

Environmental hazards

H410: Very toxic to aquatic life with long lasting effects. Supplemental: EUH066: Repeated exposure may cause skin dryness or cracking. No additional hazards. NOTE: This material should not be used for any other purpose than the intended use in Section 1 without expert advice. Health studies have shown that chemical exposure may cause potential human health risks which may vary from person to person.

Prevention

P201: Obtain special instructions before use. P202: Do not handle until all safety precautions have been read and understood. P260: Do not breathe mist / vapours. P271: Use only outdoors or in a well-ventilated area. P273: Avoid release to the environment. P280: Wear protective gloves and clothing.

Response

P304 + P340 IF INHALED Remove person to fresh air and keep comfortable for breathing P308 + P313 IF exposed or concerned Get medical advice/ attention P312: Call a POISON CENTRE or doctor/physician if you feel unwell. P391: Collect spillage.

Storage

P405: Store locked up.

Disposal

P501: Dispose of contents and container in accordance with local regulations.

Contains

Residues (petroleum), catalytic cracking

Other physicochemical hazards

Thermal burn hazard - contact with hot material may cause thermal burns.

Health hazards

High-pressure injection under skin may cause serious damage. Hydrogen sulphide, a highly toxic gas, may be present. Signs and symptoms of overexposure to hydrogen sulphide include respiratory and eye irritation, dizziness, nausea, coughing, a sensation of dryness and pain in the nose, and loss of consciousness. Odour does not provide a reliable indicator of the presence of hazardous levels in the atmosphere. Excessive exposure may result in eye, skin, or respiratory irritation.