Welding Material (Baked Type Flux for Submerged Arc Welding)

ESAB SeAH Corporation

Revision date : 2013-12-02

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS07 GHS08
Health risk rating 4
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

1344-28-1

Name of the chemical

aluminium oxide

Concentration

N/A

EC/CAS

7440-47-3

Name of the chemical

Chromium‡

Concentration

N/A

EC/CAS

7789-75-5

Name of the chemical

Calcium fluoride

Concentration

N/A

EC/CAS

7439-96-5

Name of the chemical

Manganese

Concentration

N/A

EC/CAS

1344-09-8

Name of the chemical

Silicic acid, sodium salt

Concentration

N/A

Listed in

General Information

Revision date

2013-12-02

Product name

Welding Material (Baked Type Flux for Submerged Arc Welding)

1.2.1 Relevant identified uses

Baked type flux for submerged arc welding (refer to product guide book)

supplier name

ESAB SeAH Corporation

Emergency telephone

055-269-8111, 055-269-8225

Icons in SDS

Company Information

company name

ESAB SeAH Corporation

GHS Information

Signal word

Warning

Hazard Codes

Hazard statements (CLP)

H317, H351, H373

Hazard statements

Code

Statements

H317

May cause an allergic skin reaction

H351

Suspected of causing cancer

H373

May cause damage to organs through prolonged or repeated exposure

Section 2

2.1 Classification of the substance or mixture

Skin sensitizer: category 1 Carcinogenicity: category 2 Specific target organ toxicity (repeated exposure): category 2

Signal word

Warning

Hazard statements

H317 May cause an allergic skin reaction. H351 Suspected of causing cancer. H373 May cause damage to organs through prolonged or repeated exposure.

Precautionary statements

A) Prevention P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P260 Do not breathe dust/fume/gas/mist/vapours/spray. P261 Avoid breathing dust/fume/gas/mist/vapours/spray. P272 Contaminated work clothing should not be allowed out of the workplace. P280 Wear protective gloves/protective clothing/eye protection/face protection. B) Response P302+P352 If on skin, wash with plenty of water. P308+P313 If exposed or concerned, get medical advice/attention. P314 Get medical advice/attention if you feel unwell. P333+P313 If skin irritation or rash occurs, get medical advice/attention. P363 Wash contaminated clothing before reuse. C) Storage P405 Store locked up. D) Disposal P501 Dispose of contents/container in accordance with related laws.

Other hazards which do not result in classification

No available data During welding When these products are used in a welding process, the most important hazards are heat, radiation, electric shock and welding fumes. Heat : Spatter and melting metal can cause burn injuries and start fires. Radiation : Arc rays can severely damage eyes or skin. Electricity : Electric shock can kill. Fumes : Overexposure to welding fume may result in symptoms like metal fume fever, dizziness, nausea, dryness or irritation of the nose, throat or eyes. Chronic overexposure to welding fumes may affect pulmonary function.

Prevention

Welding fumes and gases may be dangerous to your health. Use adequate ventilation to keep fumes from the breathing zone. Arc rays may injure eyes and burn skin. Wear adequate hand, head, eye and body protection.

Response

Not applicable

Storage

Stored locked up and keep dry

Disposal

Not applicable

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.