Note: Ingredients listed on restricted chemical lists
EC/CAS
7789-75-5
Name of the chemical
Calcium fluoride
Concentration
N/A
EC/CAS
7440-47-3
Name of the chemical
Chromium; chromic acid and its salts
Concentration
N/A
EC/CAS
7440-50-8
Name of the chemical
Copper
Concentration
N/A
EC/CAS
7440-02-0
Name of the chemical
Nickel
Concentration
N/A
EC/CAS
1310-58-3
Name of the chemical
potassium hydroxide
Concentration
N/A
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
N/A
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
N/A
EC/CAS
215-279-6
Name of the chemical
Calcium carbonate
Concentration
N/A
EC/CAS
232-188-7
Name of the chemical
Calcium fluoride
Concentration
N/A
EC/CAS
231-157-5
Name of the chemical
Chromium; chromic acid and its salts
Concentration
N/A
EC/CAS
231-159-6
Name of the chemical
Copper (nano) [INCI] (11), Colloidal Copper (nano) [INCI] (11)
Concentration
N/A
EC/CAS
231-111-4
Name of the chemical
Nickel, Metall (790/2009)
Concentration
N/A
EC/CAS
215-181-3
Name of the chemical
Potassium or sodium hydroxide (20) Potassium hydroxide (21)
Concentration
N/A
EC/CAS
238-878-4
Name of the chemical
Quarz-A-Staub (s. u. TRGS 906)
Concentration
N/A
EC/CAS
236-675-5
Name of the chemical
Titandioxid; [in Pulverform mit mindestens 1 % Partikel mit aerodynamischem Durchmesser ≤ 10 μm] (2020/217)
Concentration
N/A
General Information
Revision date
2014-05-01
Product name
ARCALOY AND OK NICKEL & COPPER COVERED
supplier name
ESAB GROUP CANADA, INC
Icons in SDS
Company Information
company name
ESAB GROUP CANADA, INC
Section 2
SECTION 2: Hazards identification
Emergency Overview: Coated metal rods in varying colors. These products are normally not considered hazardous as shipped. Gloves should be worn when handling to prevent contaminating hands with product dust. These products contain nickel, which is classified as toxic by prolonged inhalation, a skin sensitizer and a suspect carcinogen. In the form that nickel is present in these products it does not contribute to a hazard classification of the products. Some of these products contain cryolite, which is classified as toxic and dangerous for the environment. These products contain titanium dioxide which is possibly carcinogenic. These products contain quartz, but normally not in an inhalable fraction. Quartz can cause silicosis and may cause cancer. Avoid eye contact or inhalation of dust from these products. Skin contact is normally no hazard but should be avoided to prevent possible allergic reactions. Persons with a pacemaker should not go near welding or cutting operations until they have consulted their doctor and obtained information from the manufacturer of the device. When these products are used in a welding process, the most important hazards are heat, radiation, electric shock and welding fumes. Heat: Spatter and melting metal can cause burn injuries and start fires. Radiation: Arc rays can severely damage eyes or skin. Electricity: Electric shock can kill. Fumes: Overexposure to welding fumes may result in symptoms like metal fume fever, dizziness, nausea, dryness or irritation of the nose, throat or eyes. Chronic overexposure to welding fumes may affect pulmonary function. Prolonged inhalation of nickel and chromium compounds above safe exposure limits can cause cancer. Overexposure to manganese and manganese compounds above safe exposure limits can cause irreversible damage to the central nervous system, including the brain, symptoms of which may include slurred speech, lethargy, tremor, muscular weakness, psychological disturbances and spastic gait.
