Note: Ingredients listed on restricted chemical lists
EC/CAS
231-153-3/7440-44-0
Name of the chemical
Carbon black
Concentration
<4%
General Information
Revision date
2018-01-14
Product name
Oxweld 200 Cutting & Scarfing Powder
1.2.1 Relevant identified uses
Powder cutting of ferrous, non-ferrous and non-metallic materials
supplier name
ESAB DENTON
Emergency telephone
1-800-372-2123
Icons in SDS
Company Information
company name
ESAB DENTON
e-mail address of the competent person responsible for the Safety Data Sheet
sdsrequest@esab.com
Hazard Codes
Hazard statements (CLP)
H240
Hazard statements
Code
Statements
H240
Heating may cause an explosion
Section 2
SECTION 2: Hazards identification
Classification of the substance or mixture The product is not classified
2.2 Label elements
The product do not require labeling
2.3 Other hazards
Avoid eye contact or inhalation of dust from this product. Skin contact is normally no hazard but should be avoided to prevent possible allergic reactions. Persons with a pacemaker should not go near welding or cutting operations until they have consulted their doctor and obtained information from the manufacturer of the device. When this product is used in a welding process, the most important hazards are welding fumes, heat, radiation and electric shock. Fumes: Overexposure to welding fumes may result in symptoms like metal fume fever, dizziness, nausea, dryness or irritation of the nose, throat or eyes. Chronic overexposure to welding fumes may affect pulmonary function. Heat: Spatter and melting metal can cause burn injuries and start fires. Radiation: Arc rays can severely damage eyes or skin. Electricity: Electric shock can kill. Other Emergency Overview: Grey metal powder with no odor. This product is normally not considered hazardous when transported. Gloves should be worn when handling to prevent contaminating hands with product dust.
2.1 Classification of the substance or mixture
The product is not classified
