Note: Ingredients listed on restricted chemical lists
EC/CAS
215-691-6/1344-28-1
Name of the chemical
aluminium oxide
Concentration
30-40%
EC/CAS
232-188-7/7789-75-5
Name of the chemical
Calcium fluoride
Concentration
10-15%
EC/CAS
215-687-4/1344-09-8
Name of the chemical
Silicic acid, sodium salt
Concentration
5-10%
EC/CAS
236-675-5/13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
5-10%
EC/CAS
215-171-9/1309-48-4
Name of the chemical
magnesium oxide
Concentration
2-5%
EC/CAS
238-878-4/14808-60-7
Name of the chemical
Silica, crystalline
Concentration
<3%
General Information
Revision date
2018-01-14
Product name
Test- Feb18
supplier name
ESAB AB
Icons in SDS
Company Information
company name
ESAB AB
e-mail address of the competent person responsible for the Safety Data Sheet
sdsrequest@esab.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H302, H332, H372
Hazard statements
Code
Statements
H302
Harmful if swallowed
Section 2
Classifications
Causes eye irritation, Category 2B Specific Target Organ Toxicity — Repeated exposure, hazard category 1
Hazard statements
H302, H332, H372 H302 Harmful if swallowed. H332 Harmful if inhaled. H372 Causes damage to organs through prolonged or repeated exposure.
2.2 Label elements
Labelling according to Regulation (EC) No 1272/2008
Signal word
Danger
Precautionary statements
P260 Do not breathe dust. P261 Avoid breathing dust. P264 Wash hands and face thoroughly after handling. P270 Do no eat, drink or smoke when using this product. P271 Use only outdoors or in a well-ventilated area. P301 + P312 IF SWALLOWED: Call a POISON CENTER/doctor/physician if you feel unwell. P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P312 Call a POISON CENTER/doctor physician if you feel unwell. P314 Get medical advice/attention if you feel unwell. P330 Rinse mouth. P337 + P313 If eye irritation persists: Get medical advice/attention. P501 Dispose of contents/container to by lawful and appropriate disposal method.
2.3 Other hazards
This product contains titanium dioxide which is possibly carcinogenic. This product contains quartz, normally not in an inhalable fraction. However dust from this flux both in inhalable and respirable fraction can cause silicosis and may cause cancer. Avoid eye contact or inhalation of dust from the product. Skin contact is normally no hazard but should be avoided to prevent possible allergic reactions. Persons with a pacemaker should not go near welding or cutting operations until they have consulted their doctor and obtained information from the manufacturer of the device. When this product is used in a welding process, the most important hazards are welding fumes, heat, radiation and electric shock. Fumes: Welding fumes are normally not a hazard with submerged arc welding, unless the arc burns through the flux bedding. Use enough flux to avoid burn-through. Overexposure to welding fumes may result in symptoms like metal fume fever, dizziness, nausea, dryness or irritation of the nose, throat or eyes. Chronic overexposure to welding fumes may affect pulmonary function. Heat: Spatter and melting metal can cause burn injuries and start fires. Radiation: Arc rays can severely damage eyes or skin. Electricity: ELECTRIC SHOCK can kill. Other Emergency Overview: Granules in varying colours. This product is normally not considered hazardous as shipped. Gloves should be worn when handling to prevent contaminating hands with product dust.
