Note: Ingredients listed on restricted chemical lists
EC/CAS
231-157-5/7440-47-3
Name of the chemical
Chromium; chromic acid and its salts
Concentration
21-24%
EC/CAS
231-111-4/7440-02-0
Name of the chemical
Nickel
Concentration
10-12%
EC/CAS
236-675-5/13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
8-12%
EC/CAS
231-105-1/7439-96-5
Name of the chemical
Manganese
Concentration
1-3%
EC/CAS
238-878-4/14808-60-7
Name of the chemical
Silica, crystalline
Concentration
0-1%
EC/CAS
231-159-6/7440-50-8
Name of the chemical
Copper
Concentration
0-0.5%
EC/CAS
231-176-9/7440-67-7
Name of the chemical
Zirconium and its compounds, with the exception of the substances listed under reference number 50 in Annex III, and the zirconium lakes, pigments or salts of the colouring agents when listed in Annex IV
Concentration
0-0.5%
EC/CAS
240-896-2/16871-90-2
Name of the chemical
Dipotassium hexafluorosilicate
Concentration
0-0.5%
EC/CAS
231-667-8/7681-49-4
Name of the chemical
Sodium fluoride
Concentration
0-0.5%
EC/CAS
215-691-6/1344-28-1
Name of the chemical
aluminium oxide
Concentration
0-0.2%
EC/CAS
215-168-2
Name of the chemical
Iron Oxide Red
Concentration
0-0.2%
General Information
Revision date
2021-09-21
Product name
Shield-Bright 309L
supplier name
ESAB AB
Emergency telephone
+1 703-741-5970, 1-800-424-9300
Icons in SDS
Company Information
company name
ESAB AB
e-mail address of the competent person responsible for the Safety Data Sheet
sdsrequest@esab.com
Section 2
SECTION 2: Hazards identification
Regulation (EC) No. 1272/2008 Classification of the substance or mixture Description This product is not classified as hazardous according to applicable GHS hazard classification criteria as
Other hazards
This product contains nickel, which is classified as toxic by prolonged inhalation, a skin sensitizer and a suspect carcinogen. Nickel powder is harmful for the environment. This product contains titanium dioxide which is possibly carcinogenic. Avoid eye contact or inhalation of dust from this product. Skin contact is normally no hazard but should be avoided to prevent possible allergic reactions. Persons with a pacemaker should not go near welding or cutting operations until they have consulted their doctor and obtained information from the manufacturer of the device. When this product is used in a welding process, the most important hazards are welding fumes, heat, radiation and electric shock. Radiation: Arc rays can severely damage eyes or skin. Electricity: ELECTRIC SHOCK can kill. Heat: Spatter and melting metal can cause burn injuries and start fires. Fumes: Overexposure to welding fumes may result in symptoms like metal fume fever, dizziness, nausea, dryness or irritation of the nose, throat or eyes. Chronic overexposure to welding fumes may affect pulmonary function. Prolonged inhalation of nickel and chromium compounds above safe exposure limits can cause cancer. Overexposure to manganese and manganese compounds above safe exposure limits can cause irreversible damage to the central nervous system, including the brain, symptoms of which may include slurred speech, lethargy, tremor, muscular weakness, psychological disturbances and spastic gait. Other Other This product is normally not considered hazardous when transported. Gloves should be worn when handling to prevent cuts and abrasions. Emergency Overview: Metal wires in varying colors.
2.1 Classification of the substance or mixture
This product is not classified as hazardous according to applicable GHS hazard classification criteria as required and defined in OSHA Hazard Communication Standard (29CFR Part 1910.1200). 2.2. Label elements
