Note: Ingredients listed on restricted chemical lists
EC/CAS
231-072-3
Name of the chemical
Aluminium
Concentration
N/A
General Information
Product name
OK Tigrod 4043
1.2.1 Relevant identified uses
uses
supplier name
ESAB AB
Icons in SDS
Company Information
company name
ESAB AB
e-mail address of the competent person responsible for the Safety Data Sheet
sds.esab@esab.se
Section 2
2.1 Classification of the substance or mixture
N.a
2.2 Label elements
N.a
2.3 Other hazards
Skin contact is normally no hazard but should be avoided to prevent possible allergic reactions. Persons with a pacemaker should not go near welding or cutting operations until they have consulted their doctor and obtained information from the manufacturer of the device. When this product is used in a welding process, the most important hazards are welding fumes, heat, radiation and electric shock. Fumes: Very small amounts of welding fumes are normally produced by TIG welding. Overexposure to welding fumes may result in symptoms like metal fume fever, dizziness, nausea, dryness or irritation of the nose, throat or eyes. Chronic overexposure to welding fumes may affect pulmonary function. Heat: Spatter and melting metal can cause burn injuries and start fires. Radiation: Arc rays can severely damage eyes or skin. Electricity: Electric shock can kill. 3.2. Mixtures: This product is a solid metal rod. Wire Weight REACH Haz. NTP/ Haz.
