OK FLUX 10.81 W

Hazard statements (CLP)

H317, H351, H372, H412

Code

Statements

H317

May cause an allergic skin reaction

CLP CLASSIFICATION

Danger classes Carcinogenicity, hazard category 2 Specific Target Organ Toxicity — Repeated exposure, hazard category 1 Skin sensitisation, hazard category 1

Hazard statements

H317, H351, H372, H412 H317 May cause an allergic skin reaction. H351 Suspected of causing cancer. H372 Causes damage to organs through prolonged or repeated exposure . H412 Harmful to aquatic life with long lasting effects.

2.2 Label elements

Labelling according to Regulation (EC) No 1272/2008

Signal word

Danger

Precautionary statements

P260 Do not breathe dust/fume/gas/mist/vapours/spray. P264 Wash hands and other parts of the body thoroughly after handling. P501 Dispose of contents/container to Authorised place as per local and national requirements. P301 + P312 IF SWALLOWED: Call a POISON CENTER/doctor/physician if you feel unwell. P302 + P352 IF ON SKIN: Wash with plenty of water/Wash with soap and water. P312 Call a POISON CENTER/doctor /physician if you feel unwell. P321 Specific treatment (see contents on this label). P261 Avoid breathing dust/fume/gas/mist/vapours/spray. P272 Contaminated work clothing should not be allowed out of the workplace. P280 Wear protective gloves/protective clothing/eye protection/face protection. P333 +P313 If skin irritation or rash occurs: Get medical advice/attention. P362 + P364 Take off contaminated clothing and wash it before reuse. P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P308 + P313 IF exposed or concerned: Get medical advice/attention. P405 Store locked up. P270 Do no eat, drink or smoke when using this product. P314 Get medical advice/attention if you feel unwell. P273 Avoid release to the environment.

Other hazards

This product contains nickel, which is classified as toxic by prolonged inhalation, a skin sensitizer and a suspect carcinogen. Nickel powder is harmful for the environment. In the form that nickel is present in this product it does not contribute to a hazard classification of the product. Avoid eye contact or inhalation of dust from the product. Skin contact is normally no hazard but should be avoided to prevent possible allergic reactions. Persons with a pacemaker should not go near welding or cutting operations until they have consulted their doctor and obtained information from the manufacturer of the device. When this product is used in a welding process, the most important hazards are welding fumes, heat, radiation and electric shock. Fumes: Overexposure to welding fumes may result in symptoms like metal fume fever, dizziness, nausea, dryness or irritation of the nose, throat or eyes. Chronic overexposure to welding fumes may affect pulmonary function. Overexposure to manganese and manganese compounds above safe exposure limits can cause irreversible damage to the central nervous system, including the brain, symptoms of which may include slurred speech, lethargy, tremor, muscular weakness, psychological disturbances and spastic gait. disturbances and spastic gait. Heat: Spatter and melting metal can cause burn injuries and start fires. Radiation: Arc rays can severely damage eyes or skin. Electricity: ELECTRIC SHOCK can kill. Other Emergency Overview: Granules in varying colours. This product is normally not considered hazardous as shipped. Gloves should be worn when handling to prevent contaminating hands with product dust.