Note: Ingredients listed on restricted chemical lists
EC/CAS
215-691-6/1344-28-1
Name of the chemical
aluminium oxide
Concentration
10-30%
EC/CAS
232-188-7/7789-75-5
Name of the chemical
Calcium fluoride
Concentration
10-30%
EC/CAS
215-171-9/1309-48-4
Name of the chemical
magnesium oxide
Concentration
10-30%
EC/CAS
215-710-8/1344-95-2
Name of the chemical
Silicic acid, calcium salt
Concentration
5-10%
EC/CAS
238-878-4/14808-60-7
Name of the chemical
Silica, crystalline
Concentration
1-5%
EC/CAS
215-687-4/1344-09-8
Name of the chemical
Silicic acid, sodium salt
Concentration
1-5%
EC/CAS
236-675-5/13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
0.1-1%
EC/CAS
231-105-1/7439-96-5
Name of the chemical
Manganese
Concentration
0.1-1%
EC/CAS
215-279-6
Name of the chemical
Calcium carbonate
Concentration
0.1-1%
EC/CAS
215-168-2
Name of the chemical
Iron Oxide Red
Concentration
0.1-1%
General Information
Revision date
2021-02-12
Product name
OK Flux 10.74W
supplier name
ESAB AB
Icons in SDS
Company Information
company name
ESAB AB
e-mail address of the competent person responsible for the Safety Data Sheet
sdsrequest@esab.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H332, H372, H411
Hazard statements
Code
Statements
H332
Harmful if inhaled
Section 2
Hazard categories
Specific Target Organ Toxicity — Repeated exposure, hazard category 1 Hazardous to the aquatic environment — Chronic hazard category 2 Acute toxicity, inhalation, hazard category 4
Hazard statements
H332, H372, H411 H332 Harmful if inhaled. H372 Causes damage to organs through prolonged or repeated exposure . H411 Toxic to aquatic life with long lasting effects.
2.2 Label elements
Labelling according to Regulation (EC) No 1272/2008
Signal word
Danger
Precautionary statements
P270 Do no eat, drink or smoke when using this product. P314 Get medical advice/attention if you feel unwell. P260 Do not breathe dust/fume/gas/mist/vapours/spray. P264 Wash hands and face thoroughly after handling. P501 Dispose of contents/container to lawful and appropriate disposal method..
Other hazards
This welding flux product can cause a dust exposure that should be avoided. This product contains cryolite, which is classified as toxic and dangerous for the environment. This product contains titanium dioxide which is possibly carcinogenic. This product contains quartz. Quartz can cause silicosis and may cause cancer Avoid eye contact or inhalation of dust from the product. Skin contact is normally no hazard but should be avoided to prevent possible allergic reactions. GUIDANCE FOR WELDING ACTIVITY WITH THIS PRODUCT: Persons with a pacemaker should not go near welding or cutting operations until they have consulted their doctor and obtained information from the manufacturer of the device. When this product is used in a welding process, the most important hazards are welding fumes, heat, radiation and electric shock. Fumes: Welding fumes are normally not a hazard with submerged arc welding, unless the arc burns through the flux bedding. Use enough flux to avoid burn-through. Overexposure to welding fumes may result in symptoms like metal fume fever, dizziness, nausea, dryness or irritation of the nose, throat or eyes. Chronic overexposure to welding fumes may affect pulmonary function. Overexposure to manganese and manganese compounds above safe exposure limits can cause irreversible damage to the central nervous system, including the brain, symptoms of which may include slurred speech, lethargy, tremor, muscular weakness, psychological disturbances and spastic gait. disturbances and spastic gait. Heat: Spatter and melting metal can cause burn injuries and start fires. Radiation: Arc rays can severely damage eyes or skin. Electricity: ELECTRIC SHOCK can kill. Other Emergency Overview: Granules, non-volatile with varying color. Gloves should be worn when handling to prevent contaminating hands with product dust.
