Note: Ingredients listed on restricted chemical lists
EC/CAS
215-691-6/1344-28-1
Name of the chemical
aluminium oxide
Concentration
30-40%
EC/CAS
232-188-7/7789-75-5
Name of the chemical
Calcium fluoride
Concentration
20-30%
EC/CAS
238-878-4/14808-60-7
Name of the chemical
Silica, crystalline
Concentration
10-15%
EC/CAS
215-279-6
Name of the chemical
Calcium carbonate
Concentration
10-15%
General Information
Revision date
2016-06-20
Product name
OK Flux 10.47
supplier name
ESAB AB
Emergency telephone
+46 31 509000
Icons in SDS
Company Information
company name
ESAB AB
e-mail address of the competent person responsible for the Safety Data Sheet
sds.esab@esab.se
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H372
Hazard statements
Code
Statements
H372
Causes damage to organs through prolonged or repeated exposure
Section 2
EU Classification
Regulation (EC) No 1272/2008, Annex VI
Classifications
Specific Target Organ Toxicity — Repeated exposure, hazard category 1
Hazard statements
H372 H372 Causes damage to organs through prolonged or repeated exposure
2.2 Label elements
GHS labeling of the substance (in accordance with Regulation (EC) No 1272/2008, Annex VI)
Signal word
Danger
Precautionary statements
P260 Do not breathe dust P264 Wash hands and face thoroughly after handling. P270 Do no eat, drink or smoke when using this product. P314 Get medical advice/attention if you feel unwell. P501 Dispose of contents/container to lawful and appropriate disposal method..
2.3 Other hazards
This product contains quartz, but normally not in an inhalable fraction. Quartz can cause silicosis and may cause cancer. Avoid eye contact or inhalation of dust from the product. Skin contact is normally no hazard but should be avoided to prevent possible allergic reactions. Persons with a pacemaker should not go near welding or cutting operations until they have consulted their doctor and obtained information from the manufacturer of the device. When this product is used in a welding process, the most important hazards are welding fumes, heat, radiation and electric shock. Fumes: Overexposure to welding fumes may result in symptoms like metal fume fever, dizziness, nausea, dryness or irritation of the nose, throat or eyes. Chronic overexposure to welding fumes may affect pulmonary function. Overexposure to manganese and manganese compounds above safe exposure limits can cause irreversible damage to the central nervous system, including the brain, symptoms of which may include slurred speech, lethargy, tremor, muscular weakness, disturbances and spastic gait. Heat: Spatter and melting metal can cause burn injuries and start fires. Radiation: Arc rays can severely damage eyes or skin. Electricity: Electric shock can kill. Other Emergency Overview: Granules in varying colours. This product is normally not considered hazardous as shipped. Gloves should be worn when handling to prevent contaminating hands with product dust.
