Note: Ingredients listed on restricted chemical lists
EC/CAS
215-691-6/1344-28-1
Name of the chemical
aluminium oxide
Concentration
0-0.2%
EC/CAS
231-153-3/7440-44-0
Name of the chemical
Carbon black
Concentration
0-0.2%
EC/CAS
238-878-4/14808-60-7
Name of the chemical
Silica, crystalline
Concentration
0-0.2%
EC/CAS
231-176-9/7440-67-7
Name of the chemical
Zirconium and its compounds, with the exception of the substances listed under reference number 50 in Annex III, and the zirconium lakes, pigments or salts of the colouring agents when listed in Annex IV
Concentration
0-0.2%
EC/CAS
231-105-1/7439-96-5
Name of the chemical
Manganese
Concentration
0-0.1%
EC/CAS
231-100-4/7439-92-1
Name of the chemical
Blei, massiv: [Partikeldurchmesser ≥ 1 mm]
Concentration
0-0.1%
EC/CAS
231-152-8/7440-43-9
Name of the chemical
Cadmium
Concentration
0-0.1%
EC/CAS
231-157-5/7440-47-3
Name of the chemical
Chromium; chromic acid and its salts
Concentration
0-0.1%
EC/CAS
231-111-4/7440-02-0
Name of the chemical
Nickel
Concentration
0-0.1%
EC/CAS
215-168-2
Name of the chemical
Iron Oxide Red
Concentration
0-0.2%
General Information
Revision date
2021-08-03
Product name
Coreweld C6LF
supplier name
ESAB AB
Emergency telephone
+46 31 509000
Icons in SDS
Company Information
company name
ESAB AB
e-mail address of the competent person responsible for the Safety Data Sheet
sdsrequest@esab.com
Section 2
2.1 Classification of the substance or mixture
Description The product is not classified as hazardous according to applicable GHS hazard classification criteria.
2.2 Label elements
The product does not require labelling in accordance with CLP Regulation (EC) No 1272/2008.
Other hazards
This product contains quartz, but normally not in an inhalable fraction. Quartz can cause silicosis and may cause cancer. This product contains nickel, which is classified as toxic by prolonged inhalation, a skin sensitizer and a suspect carcinogen. Nickel powder is harmful for the environment. Avoid eye contact or inhalation of dust from this product. Skin contact is normally no hazard but should be avoided to prevent possible allergic reactions. Persons with a pacemaker should not go near welding or cutting operations until they have consulted their doctor and obtained information from the manufacturer of the device. When this product is used in a welding process, the most important hazards are welding fumes, heat, radiation and electric shock. Fumes: Overexposure to welding fumes may result in symptoms like metal fume fever, dizziness, nausea, dryness or irritation of the nose, throat or eyes. Chronic overexposure to welding fumes may affect pulmonary function. Prolonged inhalation of nickel and chromium compounds above safe exposure limits can cause cancer. Overexposure to manganese and manganese compounds above safe exposure limits can cause irreversible damage to the central nervous system, including the brain, symptoms of which may include slurred speech, lethargy, tremor, muscular weakness, psychological disturbances and spastic gait. Heat: Spatter and melting metal can cause burn injuries and start fires. Radiation: Arc rays can severely damage eyes or skin. Electricity: ELECTRIC SHOCK can kill. Other Emergency Overview: Metal wires in varying colors. This product is normally not considered hazardous when transported. Gloves should be worn when handling to prevent cuts and abrasions.
