ALL-STATE NO. 61 FLUX

Hazard statements (CLP)

H301, H315, H319

Code

Statements

H301

Toxic if swallowed

CLP CLASSIFICATION

Danger classes Acute toxicity, oral, hazard category 3 Eye irritation, hazard category 2 Skin irritation, hazard category 2

Hazard statements

H301, H315, H319 H301 Toxic if swallowed. H315 Causes skin irritation. H319 Causes serious eye irritation.

2.2 Label elements

Labelling according to Regulation (EC) No 1272/2008 Danger codes

Signal word

Danger

Precautionary statements

P270 Do no eat, drink or smoke when using this product. P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER/doctor/physician. P321 Specific treatment (see on this label). P405 Store locked up. P330 Rinse mouth. P301 + P312 IF SWALLOWED: Call a POISON CENTER/doctor/Physician if you feel unwell. P280 Wear protective gloves/protective clothing/eye protection/face protection. P302 + P352 IF ON SKIN: Wash with plenty of water/and soap. P312 Call a POISON CENTER/doctor physician if you feel unwell. P362 + P364 Take off contaminated clothing and wash it before reuse. P332 + P313 If skin irritation occurs: Get medical advice/attention. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337 + P313 If eye irritation persists: Get medical advice/attention. P264 Wash hands and face thoroughly after handling. P501 Dispose of contents/container to by lawful and appropriate disposal method.

Other hazards

Emergency Overview: A white, grey or blue powder with no odor. Can irritate or burn skin, especially in the presence of moisture. Toxic if swallowed. Powders can cause irritation or burns to skin, eyes, digestive tract and respiratory tract, especially in the presence of moisture. Contact with moisture may release fluorides in acidic form (HF) for which specialized first aid may be required. Toxic and may be fatal if swallowed. Gloves should be worn when handling to prevent contaminating hands with product dust. Persons with a pacemaker should not go near welding or cutting operations until they have consulted their doctor and obtained information from the manufacturer of the device. When this product is used in a brazing process, the most important hazards are heat, radiation, electric shock and brazing fumes. Heat: Spatter and melting metal can cause burn injuries and start fires. Radiation: Arc rays can severely damage eyes or skin. Electricity: ELECTRIC SHOCK can kill. Fumes: Overexposure to brazing fumes may result in symptoms like metal fume fever, dizziness, nausea, dryness or irritation of the nose, throat, and eyes. Chronic overexposure to brazing fumes may affect pulmonary function. Chronic exposure to fluorides above safe exposure levels can cause changes in bone density and the teeth (fluorosis). Flame Processing: When used with combustible gas equipment (e.g., oxy-acetylene torch), read the use and safety information for that equipment.