Note: Ingredients listed on restricted chemical lists
EC/CAS
231-072-3/7429-90-5
Name of the chemical
Aluminium
Concentration
2-5%
EC/CAS
231-159-6/7440-50-8
Name of the chemical
Copper
Concentration
0-3%
General Information
Revision date
2021-01-04
Product name
All- state No.53
supplier name
ESAB AB
Emergency telephone
+46 31 509000
Icons in SDS
Company Information
company name
ESAB AB
e-mail address of the competent person responsible for the Safety Data Sheet
sdsrequest@esab.com
GHS Information
Signal word
WARNING
Section 2
2.1 Classification of the substance or mixture
The product is not classified
2.2 Label elements
The product does not require labelling in accordance with CLP Regulation (EC) No 1272/2008.
Other hazards
Skin contact is normally no hazard but should be avoided to prevent possible allergic reactions. Persons with a pacemaker should not go near welding or cutting operations until they have consulted their doctor and obtained information from the manufacturer of the device. When this product is used in a welding process, the most important hazards are welding fumes, heat, radiation and electric shock. Fumes: Overexposure to welding fumes may result in symptoms like metal fume fever, dizziness, nausea, dryness or irritation of the nose, throat or eyes. Chronic overexposure to welding fumes may affect pulmonary function. Heat: Spatter and melting metal can cause burn injuries and start fires. Radiation: Arc rays can severely damage eyes or skin. Electricity WARNING Welding fumes and gases are hazardous to your health and may damage lungs and other organs. Use adequate ventilation. Flame Processing: When used with combustible gas equipment (e.g., oxy-acetylene torch), read the use and safety information for that equipment. Other Emergency Overview: Silver, bluish-white metallic rods. Odorless These products are normally not considered hazardous as shipped. Gloves should be worn when handling to prevent cuts and abrasions.
