ALL - STATE 125

2.1 Classification of the substance or mixture

The product is not classified

2.2 Label elements

The product does not require labelling in accordance with CLP Regulation (EC) No 1272/2008.

Other hazards

Avoid eye contact or inhalation of dust from the product. Skin contact is normally no hazard but should be avoided to prevent possible allergic reactions. Persons with a pacemaker should not go near welding or cutting operations until they have consulted their doctor and obtained information from the manufacturer of the device. When these products are used in a brazing or soldering process, the most important hazards are heat, radiation, electric shock and brazing and soldering fumes. Heat: Spatter and melting metal can cause burn injuries and start fires. Radiation: Arc rays can severely damage eyes or skin. Electricity WARNING Welding fumes and gases are hazardous to your health and may damage lungs and other organs. Use adequate ventilation. Fumes: Overexposure to brazing and soldering fumes may result in symptoms like metal fume fever, dizziness, nausea, dryness or irritation of the nose, throat or eyes. Chronic overexposure to brazing and soldering fumes may affect pulmonary function. Some individuals may develop a blue-grey skin pigmentation from exposure to silver (argyria). Flame Processing: When used with combustible gas equipment (e.g., oxy-acetylene torch), read the use and safety information for that equipment. Other Emergency Overview: Metallic wires, rods, flux coated rods or strip in varying colors. This product is normally not considered hazardous when transported. Gloves should be worn when handling to prevent contaminating hands with product dust.