Epo Tek T7110, Part A

Acute Health Hazards

Epo Tek T7110, Part A EFFECTS OF OVER EXPOSURE INGESTION: Toxicity is considered to be extremely low INHALATION: Vapors are unlikely due to physical properties SKIN CONTACT: Can cause dermatitis. EYE CONTACT: Irritating to the eyes. Can cause injury.

Potential chronic health

OF OVER EXPOSURE Can cause dermatitis and sensitization EMERGENCY & FIRST AID PROCEDURES EYE CONTACT: In case of eye contact, flush with water for at least 15 minutes. Get medical attention immediately. SKIN CONTACT: In case of skin contact, clean with soap and water. Do not use solvents. Remove contaminated clothing. INGESTION: Get medical attention immediately. INHALATION: Remove employee to fresh air. If discomfort persists, get medical attention. ____________________________________________________________________________________________ VI. SPILL OR LEAK PROCEDURES STEPS TO BE TAKEN IN CASE MATERIAL IS SPILLED: Eliminate ignition sources. Use eye and skin protection. Place leaking containers in a well ventilated area. Absorb spillage with inert material and dispose. WASTE DISPOSAL METHOD: Incinerate or use hazardous waste treatment procedures that are in accordance with federal, state and local regulations. ____________________________________________________________________________________________ VII. SPECIAL PROTECTION INFORMATION RESPIRATORY PROTECTION: Wear an NIOSH approved respirator whenever high level exposure to vapors or mist is anticipated. VENTILATION: Locale exhaust recommended for exposure control. PROTECTIVE GLOVES: Impervious gloves - neoprene or equivalent. A combination of barrier cream and gloves is recommended. EYE PROTECTION: Chemical splash goggles recommended. OTHER PROTECTIVE EQUIPMENT: For operations where contact can occur, use a face shield and impervious apron. A safety shower and eye wash facility should be available. ____________________________________________________________________________________________ VIII. SPECIAL PRECAUTIONS: Avoid contact with skin and eyes. Avoid breathing vapors. Keep containers closed when not in use. Remove all contaminated clothing immediately and wash. Wash skin thoroughly with soap and water after handling. Solvents should not be used to clean skin because of increased penetration potential - protective skin oils can be dissolved by solvents. MATERIAL SAFETY DATA SHEET EPOXY TECHNOLOGY 14 FORTUNE DRIVE PRODUCT NAME: Epo Tek T7110, Part B BILLERICA, MA 01821 INGREDIENT CODE NUMBER: Not applicable EMERGENCY PHONE: *HMIS: HEALTH- 3 FIRE-1 REACTIVITY- 0 US/CANADA: 800-255-3924 *ANSI CODE: 6 INT’L COLLECT: + 813-248-0585