Note: Ingredients listed on restricted chemical lists
EC/CAS
2855-13-2
Name of the chemical
3-aminomethyl-3,5,5-trimethylcyclohexylamine
Concentration
N/A
EC/CAS
84852-15-3
Name of the chemical
Nonylphenol (NP), mixed isomers
Concentration
N/A
General Information
Revision date
2017-08-25
Product name
630 Clear & Conductive 100% Solids Epoxy Novolac Hardeners Part B
Manufacturer Name
630 Clear & Conductive 100% Solids Epoxy Novolac Hardeners Part B
Emergency telephone
PERS
Icons in SDS
Company Information
company name
Epoxy Systems, Inc
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H302, H314, H317, H318, H332
Hazard statements
Code
Statements
H302
Harmful if swallowed
Section 2
2.1 Classification of the substance or mixture
Placard Key word
Hazard statements
Skin Sensitization, Category 1B Exclamation Warning May cause an allergic skin reaction point Skin Corrosion/Irritation, Category 1A Corrosive Danger Causes severe skin burns and eye damage Serious Eye Damage/Eye Irritation, Category 1 Corrosive Danger Causes serious eye damage Acute Toxicity: Oral, Category 4 Exclamation Warning Harmful if swallowed point Acute Toxicity: Inhalation, Category 4 Exclamation Warning Harmful if inhaled point Acute Toxicity: Skin, Category 4 Exclamation Warning Harmful in contact with skin point H317 - May cause an allergic skin reaction. H314 - Causes severe skin burns and eye damage. H318 - Causes serious eye damage. H302 - Harmful if swallowed. H332 - Harmful if inhaled.
Precautionary statements
P261 - Avoid breathing dust/fume/gas/mist/vapors/spray. P280 - Wear protective gloves/protective clothing/eye protection/face protection. P362+364 - Take off contaminated clothing and wash it before reuse. P260 - Do not breathe dust/fume/gas/mist/vapours/spray. P202 - Do not handle until all safety precautions have been read and understood. P281 - Use personal protective equipment as required.
Response
P302+352 - IF ON SKIN: Wash with plenty of soap and water. P333+313 - If skin irritation or rash occurs, seek medical advice/attention. P305+351+338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P301+330+331 - IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P311 - Call a POISON CENTER or doctor/physician. P304+340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. P314 - Get medical attention/advice if you feel unwell.
Storage
P501 - Dispose of contents/container to local, state, and federal authority requirements.
Potential health effects
Acute and Chronic) Corrosive to eyes and skin. Causes burns. May be harmful if swallowed. Irritating to respiratory system. Do not breathe vapor or mist. Do not ingest. Do not get in eyes or on skin or clothing. Use only with adequate ventilation. Keep container tightly closed and sealed until ready for use. Wash thoroughly after handling. Aspiration hazard if swallowed. Can enter lungs and cause damage. Inhalation Corrosive to respiratory tract. May cause respiratory sensitization. Skin Contact Contact with substance may cause severe burns to skin. Symptoms may include redness, edema, drying, defatting and cracking of the skin. Eye Contact Corrosive/irritationto eyes. Causes eye burns. Ingestion Harmful if swallowed. This product may produce corrosive damage to the gastrointestinal tract if it is swallowed. Ingestion may produce burns to the lips, oral cavity, upper airway, esophagus and possibly the digestive tract. Recommended Exposure Limits Not established.
Medical Conditions Generally Aggravated by Exposure
Skin disorders, Respiratory disorders, Eye disorders, Skin Allergies. OSHA Regulatory Status: This material is classified as hazardous under OSHA regulations.