441/442 Waterbourne Urethane Finishcoat Hardener Part B

Hazard statements (CLP)

H315, H319, H332, H334, H335, H373

Code

Statements

H315

Causes skin irritation

2.1 Classification of the substance or mixture

Placard Key word

Hazard statements

Skin Corrosion/Irritation, Category 2 Exclamation Warning Causes skin irritation point Serious Eye Damage/Eye Irritation, Category Exclamation Warning Causes serious eye irritation 2A point Respiratory Sensitization, Category 1 H315 - Causes skin irritation. H319 - Causes serious eye irritation. H334 - May cause allergy or asthma symptoms or breathing difficulties if inhaled. H332 - Harmful if inhaled. H373 - May cause damage to lungs through prolonged or repeated exposure. H335 - May cause respiratory irritation.

Health hazards

Danger May cause allergy or asthma symptoms or breathing difficulties if inhaled Acute Toxicity: Inhalation, Category 4 Exclamation Warning Harmful if inhaled point Target Organ Systemic Toxicity (repeated Warning May cause damage to lungs through prolonged or repeated exposure), Category 2 exposure. Target Organ Systemic Toxicity (single Exclamation Warning May cause respiratory irritation,or may cause drowsiness exposure), Category 3 point and dizziness

Precautionary statements

P262 - Do not get in eyes, on skin, or on clothing. P280 - Wear protective gloves/protective clothing/eye protection/face protection. P260 - Do not breathe dust/fume/gas/mist/vapours/spray. P285 - In case of inadequate ventilation wear respiratory protection.

Response

P302+352 - IF ON SKIN: Wash with plenty of soap and water. P332+313 - If skin irritation occurs, get medical advice/attention. P362 - Take off contaminated clothing. P305+351+338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+313 - If eye irritation persists, get medical advice/attention. P304+341 - IF INHALED: If breathing is difficult, remove to fresh air and keep at rest in a position comfortable for breathing. P342+311 - If experiencing respiratory symptoms call a POISON CENTER or doctor/physician. P301+330+331 - IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P313 - Get medical advice/attention.

Storage

P501 - Dispose of contents/container to local, state, and federal authority requirements. P402+404 - Store in a dry place and/or in closed container.

Potential health effects

Acute and Chronic) May cause sensitization. Moderate irritant. Inhalation May cause respiratory tract irritation. May cause sensitization by inhalation. May cause allergic respiratory reaction. Skin Contact Causes skin irritation. May cause sensitization by skin contact. Eye Contact Causes eye irritation. Ingestion May be harmful if swallowed. Recommended Exposure Limits Homopolymer of Hexamethylene Diisocyanate (28182-81-2) Exposure Limit time weighted average 0.5 mg/m3 Exposure Limit Short Term Exposure Limit (STEL): 1.0 mg/m3 (15-min) Hexamethylene-1,6-Diisocyanate (822-06-0) ACGIH Threshold Limit Values Time Weighted Average (TWA): 0.005 ppm Exposure Limit Ceiling Limit Value: 0.02 ppm

Medical Conditions Generally Aggravated by Exposure

Skin disorders, Respiratory disorders, Eye disorders, Skin Allergies. OSHA Regulatory Status: This material is classified as hazardous under OSHA regulations.