PART A -- SP400702R, SP400711R, SP400745R

EnvironMolds, LLC

Revision date : 2015-07-08

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS07 GHS08
Health risk rating 5
Safety risk rating 1
Environmental risk rating 5

Note: Ingredients listed on restricted chemical lists

General Information

Revision date

2015-07-08

Product name

PART A -- SP400702R, SP400711R, SP400745R

1.2.1 Relevant identified uses

Component for Polyurethane RTV Rubber;

Emergency telephone

1-(800)-424-9300

Icons in SDS

GHS07 GHS08

Company Information

company name

EnvironMolds, LLC

e-mail address of the competent person responsible for the Safety Data Sheet

info@artmolds.com

GHS Information

Signal word

DANGER!

Section 2

Classification according to GHS

Acute Toxicity—Inhalation Category 4 Skin Irritation Category 2 Eye Irritation Category 2A Respiratory Sensitizaton Category 1 Skin Sensitizaton Category 1 Carcinogenicity Category 2 Specific Target Organ Toxicity—Repeat Exposure Category 3 (Respiratory Irritation)

Signal word

DANGER!

Hazard statements

Causes skin irritation; May cause allergic skin reaction; Causes serious eye irritation; Harmful if inhaled; May cause allergy or asthma symptoms or breathing difficulties if inhaled; May cause respiratory irritation; Suspected of causing cancer.

Precautionary statements

Do not handle until all safety precautions have been read and understood; Avoid breathing vapors or mists; Wash thoroughly after handling; Wear protective gloves, protective clothing, eye protection, and face protection; In case of inadequate ventilation, wear respiratory protection; Take off contaminated clothing and wash before reuse. IF ON SKIN: Wash with plenty of soap and water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF INHALED: If breathing is difficult, remove person to fresh air and keep comfortable for breathing. If exposed or concerned: Get medical attention. Store in a well ventilated place. Keep container tightly closed. Dispose of contents and container in accordance with local, state, and federal regulations.

Additional information

Individuals sensitized to isocyanates should discontinue use. Long-term overexposure to isocyanates may cause lung damage. This is one part of a two-component system. Read and understand the hazard information on part B before using.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.