Note: Ingredients listed on restricted chemical lists
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
1-5
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
0.1-1
General Information
Revision date
2025-02-17
Product name
TM CA LOW VISC YEL ALK EXT
1.2.1 Relevant identified uses
Industrial applications, Used by spraying
supplier name
Ennis Paint Canada ULC
Emergency telephone
+1 800-331-8118
Icons in SDS
Company Information
company name
Ennis Paint Canada ULC
GHS Information
Signal word
Danger
Section 2
SECTION 2: Hazards identification
Classification of the substance or mixture COMBUSTIBLE DUSTS - Category 1 CARCINOGENICITY - Category 1A
Signal word
Danger
Hazard statements
May cause cancer. May form combustible dust concentrations in air.
Prevention
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves, protective clothing and eye or face protection.
Response
IF exposed or concerned: Get medical advice or attention. Avoid all contact with molten thermoplastic. When hot, thermoplastic material liquifies, becomes very tacky and will adhere to anything it touches. Molten thermoplastic can cause third degree burns if it comes in contact with skin. For thermal skin burns, immediately flush the area with plenty of cold water and seek immediate medical attention. Remove contaminated clothing only if not adhering to skin. If clothing or molten thermoplastic material is adhering to skin, do not attempt to remove. Removal could result in severe tissue damage. For thermal eye burns, immediately flush eye with plenty of cold water. Do not attempt to remove contact lenses. Cover eye with sterile dressing and seek immediate medical attention.
Storage
Store locked up.
Disposal
Dispose of contents and container in accordance with all local, regional, national and international regulations.
Supplemental label elements
Keep container tightly closed. Keep away from heat, sparks, open flames and hot surfaces. - No smoking. Sanding and grinding dusts may be harmful if inhaled. This product contains crystalline silica which can cause lung cancer or silicosis. The risk of cancer depends on the duration and level of exposure to dust from sanding surfaces or mist from spray applications. Prevent dust accumulation. Emits toxic fumes when heated. Percentage of the mixture consisting of ingredient(s) of unknown acute toxicity: 43.7% (oral), 85.8% (dermal), 55.6% (inhalation)
Other hazards which do not result in classification
None known.
2.1 Classification of the substance or mixture
COMBUSTIBLE DUSTS - Category 1 substance or mixture CARCINOGENICITY - Category 1A
