This ‘Product Safety Data Information’ Sheet covers White Multi-well AcroPrep plates with Glass Fiber

pall corporation

Revision date : 2021-09-28

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
Health risk rating 1
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

100-41-4

Name of the chemical

Ethylbenzene

Concentration

N/A

Listed in

EC/CAS

9003-07-0

Name of the chemical

polypropylene wax

Concentration

N/A

EC/CAS

98-82-8

Name of the chemical

Cumol (2022/692)

Concentration

N/A

EC/CAS

13463-67-7

Name of the chemical

Reaction mass of titanium dioxide and silver chloride

Concentration

N/A

EC/CAS

100-42-5

Name of the chemical

Styrene ( Vinyl benzene )

Concentration

N/A

General Information

Revision date

2021-09-28

Product name

This ‘Product Safety Data Information’ Sheet covers White Multi-well AcroPrep plates with Glass Fiber

1.2.1 Relevant identified uses

The articles detailed above are intended for use in Laboratory analytical applications, by professional users They are not a Medical Device

Emergency telephone

DATA INFORMATION

Icons in SDS

Company Information

company name

pall corporation

GHS Information

Signal word

Not

Section 2

Product definition

Article. These finished articles are not classified as hazardous according to REACH Regulation 1907/2006, or European CLP/GHS Regulation 1272/2008.

Signal word

Not applicable

Hazard statements

Not applicable

Special packaging requirements

Not applicable __________________________________________________________________________________________________________ SECTION 3 - Materials of Construction 3.1 The filters detailed in Section 1 are comprised of the following materials: Material Name CAS Number Percentage in Composition (goods) Hardware - Polypropylene 9003-07-0 75 – 80 with TiO2 13463-67-7 0.5 – 1.0 Other colourant components N/A < 0.5 Hardware 9003-53-6 15 - 25 Polystyrene Borosilicate glass (Binder free) 65997-17-3 0.1 – 1.0 For packaging material information see section 13. These products not known to contain BADGE, NOGE, or BFDGE. Trace additives will not be present in the plastic components. There are no additional ingredients present which, within the current knowledge of the supplier, are classified and contribute to the classification of the article. There are no current SVHC substances known to be present in the finished articles above 0.1%. There are no current ROHS2 Directive (2011/65/EU) and amendment (2015/863) substances of concern (including Lead, Cadmium, Mercury, Hexavalent Chromium, Polybrominated biphenyl (PBB), Polybrominated diphenyl ether (PBDE), Bis(2-ethylhexyl) phthalate (DEHP), Benzyl Butyl Phthalate (BBP), Dibutyl phthalate (DBP) and Diisobutyl phthalate (DIBP)) known to be present in the materials employed in excess of the limits laid down, based on information from our suppliers and knowledge of substances used within Pall the manufacturing facility. Pall filters do not employ natural rubber latex, or latex derivatives in their construction. These products (see appendix 1) do not contain animal materials (i.e. animal parts, tissues, or body fluids). However, to assist our customers in performing a TSE/BSE risk assessment, we are pleased to provide the following information: Pall filters for healthcare and laboratory applications may utilise components which are fabricated from plastic resins containing animal-derived additives at trace levels such as tallow-derived substances. Please be advised that tallow-derived additives are not considered specified BSE risk materials according to the current revision of the U.S. Code of Federal Regulations, Title 21 of part 189.5. Furthermore, the CPMP's Note for guidance on minimising the risk of transmitting animal spongiform encephalopathies via human and veterinary medicinal products (EMA410/01 rev 3) gives specific consideration to tallow derivatives and state they are unlikely to be infectious due to the rigorous processing steps used during their manufacture (an example of which is transesterification, or hydrolysis, at not less than 200°C under pressure for not less than 20 minutes). ! The State of California requires ‘clear and reasonable warnings’ in respect of amounts of specific chemicals in the consumer products they purchase, in homes or workplaces or that are released into the environment. The aim of the warnings is to protect against chemicals known by the State of California to cause cancer, birth defects or reproductive harm. The list of substances of concern, form, and/or the concentration present above which notification for each substance is required (or ‘safe harbor level’) being that published by the State and known as the California Proposition-65 list. Pall cannot at this time confirm that the residual level of the substances listed below would result in the indirect exposure of an individual to levels above their Cal Prop-65 threshold exposure limit, due to the wide range of migration scenarios that could be encountered in their use. However due to design and construction of these products, inhalation or ingestion of these articles are considered unlikely exposure scenarios for Pall AcroPrep Laboratory products. Also, as gloves are also recommended to be used when handling Pall AcroPrep Laboratory products to maintain cleanliness of the product, skin contact is also considered an unlikely exposure scenario. Pall will continue to monitor updates to California Proposition-65. Should you have any questions related to the information provided by Pall please do not hesitate to contact your local Pall Customer Services department. These articles, placed on the market in the State of California, are not intended for ‘consumer’ sale and are for professional use only, and as the result of use will be expected to be disposed of as ‘hazardous waste’ within an appropriate waste stream reflecting the contaminant present as the result of use. These articles are supplied in sealed bags and boxed. Hence, any anticipated, direct contact with the materials of construction of those items is expected to be through ‘occupational exposure’, which does not require mandatory labelling of all articles. These articles may contain trace residual levels of the following substances, but Pall does not test for them. Those substances are listed below:

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.