Note: Ingredients listed on restricted chemical lists
General Information
Revision date
2017-07-31
Product name
This ‘Product Safety Data Information’ Sheet covers Pall disposable filter cartridges, employing a
CAS No.
9003-07-0
1.2.1 Relevant identified uses
The filters detailed above are intended for filtration and separation applications with compatible fluids – which do not soften, swell or adversely affect the filter, or its materials of construction. For use in line with Pall’s instructions for use and within published recommended use conditions
Emergency telephone
DATA INFORMATION
Icons in SDS
Company Information
company name
pall corporation
GHS Information
Signal word
No
Section 2
Product definition
Article. These products are not classified as hazardous according to REACH Regulation 1907/2006, or European CLP/GHS Regulation 1272/2008.
Signal word
No signal word.
Hazard statements
No known significant effects or critical hazards.
Special packaging requirements
None. ____________________________________________________________________________________ SECTION 3 - Materials of Construction The filters detailed in Section 1 are comprised of the following materials: Material Name Cas Number Weight % Polypropylene 9003-07-0 96 – 100% Silicone elastomer or <2% Ethylene Propylene Rubber O-Ring Seal Stainless-steel reinforcing ring* <2% *Stainless-steel reinforcing ring supplied with specific adaptor styles: AB code 7, 8, 3 and 2 These products are not known to contain BADGE, NOGE, or BFDGE. Trace additives will be present in the plastic components- for example polypropylene antioxidants are present for stabilisation purposes. There are no additional ingredients present which, within the current knowledge of the supplier, are classified and contribute to the classification of the article. There are no current SVHC substances (including Bisphenol-A) known to be present in the finished articles above 0.1%. There are no current ROHS2 Directive (2011/65/EU) and amendment (2015/863) substances of concern (including Lead, Cadmium, Mercury, Hexavalent Chromium, Polybrominated biphenyl (PBB), Polybrominated diphenyl ether (PBDE), Bis(2-ethylhexyl) phthalate (DEHP), Benzyl Butyl Phthalate (BBP), Dibutyl phthalate (DBP) and Diisobutyl phthalate (DIBP) known to be present in the polypropylene material employed in excess of the limits laid down. Products in ‘P’ and ‘W’ options do not contain materials of direct animal origin (i.e. animal parts, tissues, or body fluids). However polypropylenes are known to contain trace levels of additives (e.g. calcium stearate) which are derived from tallow. Please be advised that ‘P’ and ‘W’ grade products employ polypropylene materials in line with the CPMP's Note for guidance on minimizing the risk of transmitting animal spongiform encephalopathies via human and veterinary medicinal products (EMA410/01 rev 3) which gives specific consideration to bovine tallow derivatives and states they are unlikely to be infectious due to the rigorous processing steps used during their manufacture (an example of which is transesterification, or hydrolysis, at not less than 200°C under pressure for not less than 20 minutes). ______________________________________________________________________________________
