Note: Ingredients listed on restricted chemical lists
General Information
Revision date
2020-11-11
Product name
This ‘Product Safety Data Information’ Sheet covers MicroFunnel, MicroFunnel LP and MicroFunnel ST with GN-6 Metricel membrane
1.2.1 Relevant identified uses
The filters detailed above are intended for use in laboratory applications Specific information regarding GN-6 Metricel membrane can be found at the following links
Emergency telephone
DATA INFORMATION
Icons in SDS
Company Information
company name
pall corporation
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H228
Hazard statements
Code
Statements
H228
Flammable solid
Section 2
Product definition
Article. These products are classified as hazardous according to REACH Regulation 1907/2006, or European CLP/GHS Regulation 1272/2008.
Signal word
Danger
Hazard statements
H228 – Flammable solid
Special packaging requirements
Not applicable ___________________________________________________________________________________ SECTION 3 - Materials of Construction The filters detailed in Section 1 are comprised of the following materials: Material Name CAS Number Percentage Composition Cellulose nitrate and esters of cellulose < 1 Polystyrene 9003-53-6 20 – 25 Cellulose 9004-34-6 1.5 – 2.5 Polyethylene 9002-88-4 1.5 – 3.5 Polypropylene 9003-07-0 70 – 75 These products not known to contain BADGE, NOGE, or BFDGE. Trace additives will not be present in the plastic components. There are no additional ingredients present which, within the current knowledge of the supplier, are classified and contribute to the classification of the article. There are no current SVHC substances known to be present in the finished articles above 0.1%. There are no current ROHS2 Directive (2011/65/EU) and amendment (2015/863) substances of concern (including Lead, Cadmium, Mercury, Hexavalent Chromium, Polybrominated biphenyl (PBB), Polybrominated diphenyl ether (PBDE), Bis(2-ethylhexyl) phthalate (DEHP), Benzyl Butyl Phthalate (BBP), Dibutyl phthalate (DBP) and Diisobutyl phthalate (DIBP)) known to be present in the materials employed in excess of the limits laid down, based on information from our suppliers and knowledge of substances used within Pall the manufacturing facility. Pall filters do not employ natural rubber latex, or latex derivatives in their construction. These products (see appendix 1) do contain animal materials (i.e. animal parts, tissues, or body fluids). However, to assist our customers in performing a TSE/BSE risk assessment, we are pleased to provide the following information: Pall filters for healthcare and laboratory applications may utilise components which are fabricated from plastic resins containing animal-derived additives at trace levels such as tallow-derived substances. Please be advised that tallow-derived additives are not considered specified BSE risk materials according to the current revision of the U.S. Code of Federal Regulations, Title 21 of part 189.5. Furthermore, the CPMP's Note for guidance on minimising the risk of transmitting animal spongiform encephalopathies via human and veterinary medicinal products (EMA410/01 rev 3) gives specific consideration to tallow derivatives and state they are unlikely to be infectious due to the rigorous processing steps used during their manufacture (an example of which is transesterification, or hydrolysis, at not less than 200°C under pressure for not less than 20 minutes). This product can expose you to Styrene, Ethylbenzene, and Cumene/isopropylbenzene which are known in the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov These products placed on the market in the State of California by Pall are not intended for ‘consumer’ sale, but, are for professional or industrial use. Therefore, the only anticipated exposure to these items would be through ‘occupational exposure’ which does not require mandatory labelling of all articles. In line with the ‘Questions and Answers for business’ (dated August 2017) on the labelling requirements – Q41 - this SDS convey this warning for occupational exposure. ______________________________________________________________________________________