E.Mix Tile Fix 383

Emix Industry (S) Pte Ltd

Revision date : 2020-01-09

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS05 GHS07
Health risk rating 4
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

14808-60-7

Name of the chemical

Silica, crystalline

Concentration

N/A

EC/CAS

238-878-4

Name of the chemical

Quarz-A-Staub (s. u. TRGS 906)

Concentration

N/A

EC/CAS

207-439-9

Name of the chemical

Calcium carbonate

Concentration

N/A

General Information

Revision date

2020-01-09

Product name

E.Mix Tile Fix 383

Substance name

and of the c

1.2.2. Uses advised against

No further relevant information available

Icons in SDS

Company Information

company name

Emix Industry (S) Pte Ltd

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H315, H317, H318, H335

Hazard statements

Code

Statements

H315

Causes skin irritation

Section 2

2.1 Classification of the substance or mixture

Classifcation according to R egulation (EC) No 1272/2008 Results of in vitro- tests have shown that cement based mixture s with more than 1% of cement cause serious skin irritation and seriou s eye damage, therefore the c lassifcation of these mixtures regarding H315 and H318 is not based on the calculation of the ingredien ts or the pH in this case. GHS05 corrosion Eye Dam. 1 H318 Causes serious eye damage. GHS07 Skin Irrit. 2 H315 Causes skin irritation. Skin Sens. 1 H317 May cause an allergic skin reaction. STOT SE 3 H335 May cause respiratory irritation.

2.2 Label elements

Labelling according to Re gulation (EC) No 1272/2008 The product is classifed and labe lled according to the CLP reg ulation.

Hazard pictograms

GHS05 GHS07

Signal word

Danger

Hazardous Ingredients

cement portland, grey milled fy ash

Hazard statements

H315 Causes skin irritation. H318 Causes serious eye damage. H317 May cause an allergic skin reaction. H335 May cause respiratory irritation.

Precautionary statements

P101 If medical advice is needed, have product container or labe l at hand. P102 Keep out of reach of children. P103 Read label before use. P280 Wear protective gloves/prote ctive clothing/eye protection/face protection. P302+P352 IF ON SKIN: Wash with plenty of water. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove c ontact lenses, if present and easy to do. Continue rinsing. P310 Immediately call a POISON CENTER/doctor. P362 Take of contaminated clothing. P501 Dispose of contents/container in accordance with local/regi onal/national/ international regulations.

2.3 Other hazards

When the dry powder product comes in contact with water or beco mes wet, a strong alkaline solution is formed. Due to the high alkalinit y, moist/wet mortar can cause skin and eye irritation. There is a risk of serious damage to health particu larly from prolonged contact The product contains silica sand with less than 1% of fne frac tion and therefore is not classifed as hazardous; however, pay attention when handling and follow the indications relating to personal protective equipment.

PBT Substances

Does not contain PBT substances

vPvB Substances

Does not contain vPvB substances *

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.