Note: Ingredients listed on restricted chemical lists
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
35% 5-10%
EC/CAS
14807-96-6
Name of the chemical
Talc
Concentration
7-13%
General Information
Revision date
2017-01-27
Product name
Emecole Metro 455, PART A
Chemical name
Polyurethane Prepolymer
Emergency telephone
Contact InfoTrac1-800-535-5053
Icons in SDS
Company Information
company name
Emecole Metro, LLC
e-mail address of the competent person responsible for the Safety Data Sheet
info@emecole.com
GHS Information
Signal word
DANGER
Section 2
SECTION 2: Hazards identification
OSHA Skin Contact: No irritation is likely to develop following short contact periods with skin. Prolonged or repeated exposure can cause skin irritation, reddening, dermatitis and in some individuals, sensitization. Skin contact may result in allergic skin reactions or respiratory sensitization but is not expected to result in absorption or amounts sufficient to cause other adverse effects. May stain skin. Eye Contact: As a liquid or dust may cause irritation, inflammation and or damage to sensitive eye tissue. Corneal injury is unlikely. Ingestion: Single dose oral toxicity is considered to be extremely low. Can result in irritation and corrosive action in mouth, stomach tissue and digestive tract.
Precautionary statements
Do not handle until all safety precautions have been read and understood. Do not breathe vapors. In case of inadequate ventilation wear respiratory protection. Wear protective gloves and eye protection. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Store locked up. Keep away from children. Dispose of contents and container in accordance with applicable local, regional and national regulations.
Signal word
DANGER
Hazard statements
Chronic As a result of previous repeated overexposure or a single large dose, certain individuals develop isocyanine sensitization (chemical asthma) or tissue injury in the upper respiratory tract. Animal tests indicate skin contact alone may also lead to allergic respiratory reaction. These effects may be permanent. Any person developing asthmatic reaction or other sensitization should be removed from further exposure.
Potential health effects
At room temperature, MDI vapors are minimal due to low vapor pressure. However, heating, foaming or otherwise dispersing (drumming, venting or pumping) operations may generate more vapor or aerosol concentrations of isocyanate. Excessive exposure may cause irritation of the eyes, upper respiratory tract and lungs. Severe overexposure may lead to pulmonary edema. Respiratory sensitization with asthma like symptoms may occur in susceptible individuals. MDI concentration below the exposure guidelines may cause allergic respiratory reactions in individuals already sensitized. Symptoms may include coughing, dryness of throat, headache, nausea, difficulty breathing and feeling of tightness in the chest. Effects may be delayed. Impaired lung function (decreased ventilators capacity) has been associated with overexposure to isocyanate. Persons With Known Respiratory or Allergy Problems Must Not Be Exposed to This Product. Carcinogenicity MDI and polymeric MDI are not listed by the NTP IARC or regulated by