Note: Ingredients listed on restricted chemical lists
EC/CAS
77-73-6
Name of the chemical
3a,4,7,7a-tetrahydro-4,7-methanoindene
Concentration
<90
General Information
Version
6
Revision date
2021-09-16
Product name
NEOZANT ESM 3213 US GHS
1.2.1 Relevant identified uses
DCPD based resin used with ESM catalysts to produce a solid thermoset polymer
Manufacturer Name
Element Labs Technologies Inc
Emergency telephone
1-800-262-8200
Icons in SDS
Company Information
company name
Element Labs Technologies Inc
e-mail address of the competent person responsible for the Safety Data Sheet
Stuart.Toner@NZTGroup.co
GHS Information
Signal word
DANGER
Section 2
SECTION 2: Hazards identification
Physical hazards
Flammable liquids Category 3
Health hazards
Acute toxicity, oral Category 4 Acute toxicity, inhalation Category 3 Skin corrosion/irritation Category 2 Serious eye damage/irritation Category 2 Specific target organ toxicity, Category 3 Respiratory tract irritation single exposure Specific target organ toxicity, Category 2 Adrenal gland, kidney, liver repeated exposure (oral)
Environmental hazards
Hazardous to the aquatic Category 2 acute hazard Hazardous to the aquatic Category 2
Hazard statements
DANGER
Precautionary statements
Flammable liquid and vapor. Harmful if swallowed. Causes skin irritation. Causes serious eye irritation. Toxic if inhaled. May cause respiratory irritation. May cause damage to organs (adrenal gland, kidney, liver) through prolonged or repeated exposure by ingestion. Toxic to aquatic life with long lasting effects.
Prevention
Keep away from heat/sparks/open flames/hot surfaces. No smoking. Keep container tightly closed. Ground/ bond container and receiving vessel. Use explosion-proof electrical systems in close proximity. Use non- sparking tools. Take precautions to avoid static electricity build up or discharge. Do not breath mist or vapor. Wear protective equipment, nitrile gloves, googles or face shields, respirator (if required). Do not eat, drink or smoke when using this product. Avoid spills and releases to the environment. Ensure areas of use are well ventilated.
Response
In all cases of serious contamination immediately call a poison center or physician. If on skin: remove all contaminated clothing. Rinse skin with water/safety shower. If Inhaled: Remove person from contaminated area to fresh air. If in eyes: Rinse eyes carefully with water for several minutes Remove contact lenses if being worn. Continue to rinse. If swallowed rinse mouth. DO NOT induce vomiting. Get immediate medical attention. If irritation from Skin or eye exposure continues get medical attention.
Storage
In the event of fire use Carbon Dioxide, Dry Chemical powder, Foam, fog or water to extinguish. Collect all materials as hazardous waste. Keep cool 50 – 90 Deg F. Avoid storage in direct sun. Store in well-ventilated area. Keep containers tightly closed. Store in secured area (locked). Once containers have been opened, use nitrogen to fill headspace to prevent explosive atmosphere and preserve resin quality. 1 of 8
Disposal
Dispose of containers and waste products in accordance with Federal, State and local regulations.
2.3 Other hazards
(HNOC) None known.
Additional information
None.