Note: Ingredients listed on restricted chemical lists
EC/CAS
25068-38-6
Name of the chemical
4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3-epoxypropane
Concentration
10-30%
EC/CAS
80-08-0
Name of the chemical
4,4′-diaminodiphenyl sulphone
Concentration
3-7%
General Information
Revision date
2015-08-15
Product name
M-BOND 43-B KIT
1.2.2. Uses advised against
No further relevant information available
Emergency telephone
1-800-424-9300, 1-703-527-3887
Icons in SDS
Company Information
company name
Electron Microscopy Sciences
e-mail address of the competent person responsible for the Safety Data Sheet
sgkcck@aol.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H225, H312, H315, H317, H319, H336
Hazard statements
Code
Statements
H225
Highly Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
GHS02 Flame Flam. Liq. 2 H225 Highly flammable liquid and vapor. GHS07 Acute Tox. 4 H312 Harmful in contact with skin. Skin Irrit. 2 H315 Causes skin irritation. Eye Irrit. 2A H319 Causes serious eye irritation. Skin Sens. 1 H317 May cause an allergic skin reaction. STOT SE 3 H336 May cause drowsiness or dizziness.
EU Classification
Directive 67/548/EEC or Directive 1999/45/EC Not applicable. Harmful Harmful in contact with skin. Irritant Irritating to eyes and skin. May cause sensitisation by skin contact. Highly flammable Highly flammable. Vapours may cause drowsiness and dizziness. · Information concerning particular hazards for human and environment: The product has to be labeled due to the calculation procedure of international guidelines. (Contd. of page 1)
Classification system
The classification was made according to the latest editions of international substances lists, and expanded upon from company and literature data. · NFPA ratings (scale 0 - 4) Health = 1 3 Fire = 3 1 0 Reactivity = 0 · HMIS-ratings (scale 0 - 4) HEALTH 1 Health = 1 FIRE 3 Fire = 3 REACTIVITY 0 Reactivity = 0
2.2 Label elements
· Labelling according to EU guidelines: The product has been classified and marked in accordance with directives on hazardous materials. · Code letter and hazard designation of product: Harmful Highly flammable
Hazardous Ingredients
reaction product: bisphenol-A-(epichlorhydrin) epoxy resin (number average molecular weight ≤ 700) Xylol, Isomerengemisch (wenn Flammpunkt<21°C)
Hazard statements
Highly flammable. Harmful in contact with skin. Irritating to eyes and skin. May cause sensitisation by skin contact. Vapours may cause drowsiness and dizziness. · WHMIS-symbols: B2 - Flammable liquid D2B - Toxic material causing other toxic effects
Precautionary statements
Keep container in a well-ventilated place. Keep away from heat. Wear suitable protective clothing and gloves. This material and its container must be disposed of as hazardous waste.
Special rules for supplemental label elements for certain mixtures
Contains epoxy constituents. See information supplied by the manufacturer.
PBT Substances
Not applicable (Contd. of page 2)
vPvB Substances
Not applicable
