EJOT VSD 8U (anchor sleeve)

SECTION 2: Hazards identification

None 4. First aid measures • In case of skin contact: Burns from melted material must be treated clinically. 5. Measures for ire ighting • Suitable extinguishing agent: Water, foam, dry extinguishing agent Speciic hazards At temperatures of > 300 °C the following may be released Carbon monoxide, hydrogen cyanide. The production of ission products and oxidation products depends on the ire conditions. Under certain ire conditions, traces of other toxic substances cannot be ruled out.

Further information

Dispose of residue from ire and contaminated extinguishing water as per the regulations of the respective authorities. 6. Measures in case of unintentional release • Procedure for cleaning or absorption: For small quantities: Absorb and dispose of with a suitable device. For large quantities: Absorb and dispose of with a suitable device. • Additional instructions: Speciic risk of slipping as a result of expelled/spilled product. 7. Handling and storage • Handling: • Fire safety and explosion protection: Take measures to prevent electrostatic charges. 8. Explosion limitation and personal safety clothing and equipment • Personal safety clothing and equipment: • General safety and hygiene measures: None 9. Physical-chemical properties Shape: Granulate, solid Colour: Various, depending on colouration Smell: Odourless Melting temperature: Approx. 220 °C (DIN 53736) Ignition temperature: > 400 °C (ASTM D1929) Density: 1.00 - 1.20 g/cm³ /(20 °C)/(EN/ISO 1183-1) Bulk density: 500 - 800 kg/m3 Water solubility: Insoluble Compiled on 19.12.2012 10. Stability and reactivity • Conditions which must be avoided: > 300°C • Hazardous decomposition products: Carbon monoxide, hydrogen cyanide 11. Toxicology information • Additional instructions: In our experience and according to the information available to use, if handled properly and used in accordance with the proper use, the product has no adverse effect on health. 12. Ecology information • Persistence and degradability: Based on previous experience this product is inert and not degradable. • Bioaccumulation potential: Due to the consistency and insolubility of the product with water, bioavailability is unlikely. • Additional instructions: • Other information on distribution & retention: Due to the consistency of the product, dispersion in the environment is not possible. Negative ecological effects are thus not to be expected based on current knowledge. 13. Instructions for disposal • Product: • Recommendation: For recycling requirements contact waste exchanges. For recycling requirements contact the manufacturer. Can be re-used after treatment. Taking into account the necessary technical regulations and after consultation with the disposing party and the respective authority, can be deposited with the domestic waste. Small quantities can be dumped together with the domestic waste. Can be re-used without treatment. • European Waste Catalogue (EAK, EWC, CED) 070213 Plastic waste (from MFSU of plastics) 120105 Plastic chippings (from shaping + surface treatment) 160119 Plastic (from used vehicles) 200139 Plastics (separately collected fraction of municipal waste) Possibly also 191204, 170203, 020104 The exact number must be determined. • Non-cleaned packaging: See recommendation • Recommendation: The packaging can be re-used after cleaning or utilised as a material. • Recommended cleaning agent: Water, with cleaning agent additive as necessary. 14. Information on transportation Not classed as hazardous material as per transport regulations (ADR RID ADNR IMDG/GGVSee ICAO/IATA) 15. Legal regulations • Regulations on safety, health and environmental protection/specific legal regulations for the substance or