Isocyanate - CHICO Speedseal (SS2 & SS6)

SECTION 2: Hazards identification

(29 CFR 1910.1200) GHS Classification Acute toxicity, inhalation (Category 4) Skin irritation (Category 2) Eye irritant (Category 2A) Respiratory sensitization (Category 1) Skin sensitization (Category 1) Specific target organ toxicity (Respiratory system, Category 2) Health Hazards/Caution Statements

Prevention

Avoid breathing dust/fume/gas/mist/vapors/spray. Wash hands and exposed skin thoroughly after handling. Wear protective gloves described in Section 8 of SDS. Use only outdoors or in a well-ventilated area. Contaminated work clothing should not be allowed out of the workplace. Wear protective gloves/protective clothing/eye protection/face protection. In case of inadequate ventilation wear respiratory protection described in Section 8 of SDS.

Response

Take off contaminated clothing and wash it before reuse. IF ON SKIN: Wash with plenty of soap and water. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye or skin irritation or rash occurs, get medical advice/attention. Call a poison center or doctor if you feel unwell. Specific treatment: see section 4 of SDS.

Storage

Store in a well-ventilated place. Keep container tightly closed. Store locked up.

Disposal

Dispose of contents/container in accordance with local/regional/national/international regulations.

2.3 Other hazards

Contains isocyanates. May produce allergic reaction. Inhalation may cause burning of the nose and throat, cough, laryngitis, chest pain and asthmatic symptoms. May cause eye and respiratory irritation. Prolonged or repeated inhalation of isocyanate vapors can cause lung damage. Heating of the product can release additional vapors. This product should not be used without adequate ventilation.

Potential health effects

May cause eye, skin, or respiratory irritation Health effects/target organs: Eyes, skin, respiratory system.

Principle Routes of Exposure

Inhalation, skin contact, eye contact Inhalation: Toxic if inhaled. May cause irritation or sensitize the respiratory tract. Sensitization of the respiratory tract may cause asthma attacks with chest tightness, breathlessness and discomfort. Skin contact: May cause irritation and sensitization. Eye contact: May cause irritation and redness. Ingestion: May cause gastrointestinal irritation and discomfort. Symptoms may include abdominal pain, nausea, vomiting, and diarrhea. Existing conditions aggravated by exposure: May aggravate pre-existing respiratory conditions. Individuals with asthma or other respiratory conditions should not be exposed to this product. Note: When reacted, this product is a portion of a 2-part rigid polyurethane foam. MDI and Polyol are supplied in separate plastic compartments in a closed plastic container. The barrier between the two substances is broken before dispersion. Contact with unreacted MDI is not expected under normal working conditions.

Environmental effects

This product is not expected to have an adverse effect on the environment.

2.1 Classification of the substance or mixture

Acute toxicity, inhalation (Category 4) Skin irritation (Category 2) Eye irritant (Category 2A) Respiratory sensitization (Category 1) Skin sensitization (Category 1) Specific target organ toxicity (Respiratory system, Category 2) Health Hazards/Caution Statements Classification According To Regulation (EC) No 1272/2008 [CLP/GHS]: Signal Word: Danger Pictograms: Hazard Statements: Harmful if inhaled Causes skin irritation Causes severe eye irritation May cause allergy or asthma symptoms or breathing difficulties if inhaled May cause an allergic skin reaction May cause respiratory irritation