ALUXCOR 95/5 Solder Paste

Hazard statements (CLP)

H302+H312+H332, H315, H318, H336, H350, H361, H373, H410

Code

Statements

H302+H312+H332

Harmful if swallowed, in contact with skin or if inhaled

SECTION 2: Hazards identification

2.1 Classification of the substance or mixture

Health: Acute Toxicity (Oral), Category 4 Acute Toxicity (Dermal), Category 4 Acute Toxicity (Inhalation), Category 4 Skin Irritation, Category 2 Eye Corrosion, Category 1 Carcinogenicity, Category 1B Reproductive Toxicity, Category 2 Target Organ Toxicity (Single exposure), Category 3 Target Organ Toxicity (Repeated exposure), Category 2 Environmental: Acute Hazards to the Aquatic Environment, Category 1 Chronic Hazards to the Aquatic Environment, Category 1

2.2 Label elements

Exclamation Corrosion

Environmental hazards

mark

Signal word

DANGER

Hazard statements

H302 + H312 + H332: Harmful if swallowed, in contact with skin or if inhaled. H315: Causes skin irritation. H318: Causes serious eye damage. H350: May cause cancer. H361: Suspected of damaging fertility or the unborn child. H336: May cause drowsiness or dizziness. H373: May cause damage to organs through prolonged or repeated exposure. H410: Very toxic to aquatic life with long lasting effects.

Prevention

P201: Obtain special instructions before use. P202: Do not handle until all safety precautions have been read and understood. P260: Do not breathe fumes or vapours. P264: Wash exposed skin thoroughly after handling. P270: Do not eat, drink or smoke when using this product. P271: Use only outdoors or in a well-ventilated area. P273: Avoid release to the environment. P280: Wear protective gloves, clothing, eye protection and face protection.

Response

P310: Immediately call a POISON CENTER or doctor. P305+P351+P338 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do Continue rinsing. P302+P352 IF ON SKIN Wash with plenty of soap and water P362+P364: Take off contaminated clothing and wash it before reuse. P304+P340 IF INHALED Remove person to fresh air and keep comfortable for breathing P391: Collect spillage.

Storage

P403+P233: Store in a well-ventilated place. Keep container tightly closed.

Disposal

P501: Dispose of container in accordance with local, regional and national regulations. EMERGENCY OVERVIEW IMMEDIATE CONCERNS: Causes skin and eye irritation and/or burns. Causes respiratory tract irritation. Fumes from the soldering/brazing process may be irritating to the eyes and respiratory system. Hot metal can cause eye and skin burns. Avoid breathing fumes from the soldering/brazing process. Use only with adequate ventilation. ROUTES OF ENTRY Potential routes of entry include eye contact, skin contact, inhalation of metallic fume and decomposition products from heating this material during the soldering/brazing process.