STAINLESS STEEL INSERTS (WITH LOCTITE 204)

Hazard statements (CLP)

H290, H303, H317, H318, H319, H334, H351, H372, H412, H413

Code

Statements

H290

May be corrosive to metals

SECTION 2: Hazards identification

(29 CFR 1910.1200) Classification of the substance or mixture

Hazard pictograms

1. Exclamation Mark

Health hazards

3. Corrosion 4. Environment

Signal word

DANGER

Hazard statements

H290 Corrosive to metals. H303 Harmful if swallowed. H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H319 Causes serious eye irritation. H334 May cause allergy, asthma symptoms, or breathing difficulties. H351 Suspected of causing cancer. H372 H412, H413 Causes damage to organs through prolonged or repeated exposures. Toxic to aquatic life, Chronic.

Prevention

P201 Review any special instructions before product use. P202 Do not handle until all safety precautions have been read and understood P261 Avoid breathing machined dusts, fumes, gases, mists, vapors, or sprays P264 Wash thoroughly after handling this product P270 Do not eat, drink, or smoke when using this product P272 Contaminated work clothing should not be allowed out of the workplace P280 Use personal protective equipment as required P284 Wear respiratory protection P285 In case of inadequate ventilation, wear respiratory protection

Response

P314 IF SWALLOWED: Call a POISON CENTER or doctor / physician if you feel unwell. P302 & P352 IF ON SKIN: Lightly brush machined dusts from skin. Rinse the skin with soap and water. P304 & P340 P305, P338, P351 IF INHALED: Remove worker to fresh air and keep in a position comfortable for breathing. IF IN EYES: Remove contact lens (if present). Rinse cautiously with water for 15 minutes. P337 & P313 IF EYE IRRITATION PERSISTS: Get medical advice / attention. P308 & P313 IF EXPOSED (or concerned): Get medical advice / attention. P363 IF CLOTHING IS CONTAMINATED: Wash before reuse. P333 & P313 P341, P342, P311 IF SKIN IRRITATION OR A RASH OCCURS: Get medical advice / attention. IF EXPERIENCING RESPIRATORY SYMPTOMS: Get medical advice / attention.

Storage

P403 Store in a well-ventilated place. P404 Keep container tightly closed. P405 Store in a secure location.

Disposal

P501 Dispose of contents / container in accordance with disposal regulations.

Other hazards which do not result in classification

This product (as shipped) is INERT in its solid form (non-hazardous). Stainless Steel products (with Loctite 204) present minor inhalation, ingestion, and contact health hazards. User-generated dust, fumes, and mists may pose a hazard if inhaled or ingested. Avoid inhalation of metal dusts and fumes. Dusts may be irritating to the unprotected skin or eyes. Metal dusts / fumes may cause an influenza-like illness. Avoid skin / eye contact with dusts to prevent mechanical irritation. Section 3 (3.1) is a summary of compounds typically found in Stainless Steel (with Loctite 204) Various grades of Stainless Steel (with Loctite 204) will contain different combinations of these compounds. Other trace elements may also be present in minute amounts. These small quantities (less than 0.1 %) are frequently referred to as "trace" or "residual" compounds.

2.1 Classification of the substance or mixture

GHS classification in accordance with: US OSHA (29 CFR 1910-1200) - Carcinogenicity, Cat. 2 / H351 - Skin sensitivity, Cat. 1 / H317 - Causes serious eye damage, Cat. 1 / H318 - Eye irritation, Cat. 2A / H319 - Specific target organ toxicity following repeated exposure, Cat. 1 / H372 - Acute toxicity, oral, Cat. 5 / H303 - Respiratory sensitivity Cat. 1 / H334 - Corrosive to metals, Cat. 1 / H290