INEFIL

Hazard statements (CLP)

H250, H260, H317, H351, H372

Code

Statements

H250

Catches fire spontaneously if exposed to air

2.1 Classification of the substance or mixture

This product is a mixture. Some of its ingredients make it hazardous according to the criteria of the Australian Safety and Compensation Council (ASCC). Not classified as dangerous goods as per the Australian Code for the transportation of Dangerous Goods by Road and Rail (ADG Code). GHS (Globally Harmonized System) classification(s): Nickel Carcinogenicity - category 2 Specific target organ toxicity (repeated exposure) - category 1 Skin sensitisation - category 1 Zircon Substance or mixture which in contact with water emits Flammable gas - category 1 Pyrophoric solid - category 1 Label elements, including precautionary statements

Hazard pictograms

GHS02 Flammable INE is a is a registered brand of Dynaweld Industrial Supplies Pty Ltd | ABN: 64 076 580 704 | +61 2 9772 1144 1 GHS07 Health Hazards GHS08 Chronic Health Hazards

Hazard statements

H351 - Suspected of causing cancer H372 - Causes damage to organs through prolonged or repeated exposure H317 - May cause an allergic skin reaction H260 - In contact with water releases flammable gases which may ignite spontaneously H250 – Catches fire spontaneously if exposed to air

Precautionary statements

P210 – Keep away from heat / sparks / open flames / hot surfaces – no smoking. P222 – Do not allow contact with air P280 – Wear protective gloves / eye protection / face protection P223 – Keep away from possible contact with water because of violent reaction and possible flash fire. P231 + P232 – Handle under inert gas. P260 / P261 – Avoid breathing dust / fume / gas / mist / vapours / spray. P272 – Contaminated work clothing should not be allowed out of the workplace. P201 – Obtain special instructions before use. P202 – Do not handle until all safety precautions have been understood. P281 – Use PPE as required. P264 – Wash exposed parts of the body after handling. P270 – Do not eat, drink or smoke when using this product.

Other hazards which do not result in classification

General: When this product is used in a welding process, there are a number of potential hazards. Please read and understand this Safety Data Sheet, the manufacturer’s instructions, precautionary labels and WTIA Technical Note No. 7 Health and Safety in Welding before using this product. Electric Shock: Electrical shock can kill. Radiation: UV, IR Radiation. Arc rays can injure eyes and burn skin. Fumes: Formation of dangerous fumes during use. Inhalation of welding fumes may cause respiratory irritation, cough. Excessive or prolonged inhalation of fumes may cause metal fume fever. Heat: Spatter, slag, melting metal, hot welds, arc rays and sparks can cause burn injuries to skin or damage to eyes and can also ignite combustibles and flammable materials. Noise: Noises generated by welding equipment may damage the auditory system. Magnetic fields: Persons with a pacemaker should not go near welding or cutting operations until they have consulted their doctor and obtained information from the manufacturer of the device. INE is a is a registered brand of Dynaweld Industrial Supplies Pty Ltd | ABN: 64 076 580 704 | +61 2 9772 1144 2