Note: Ingredients listed on restricted chemical lists
EC/CAS
75-09-2
Name of the chemical
Methylene chloride
Concentration
>60%
EC/CAS
124-38-9
Name of the chemical
Carbon dioxide CO2
Concentration
1-10%
General Information
Revision date
2025-02-04
Product name
Bossweld Anti Spatter Aerosol Spray
supplier name
and
Manufacturer Name
directions
Emergency telephone
+61 2 8761 6500
Icons in SDS
Company Information
company name
Dynaweld Industrial Supplies Pty Ltd
e-mail address of the competent person responsible for the Safety Data Sheet
sales@dynaweld.com.au
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H229, H302, H315, H319, H335, H336
Hazard statements
Code
Statements
H229
Pressurized container: may burst if heated
H302
Harmful if swallowed
H315
Causes skin irritation
H319
Causes serious eye irritation
H335
May cause respiratory irritation
H336
May cause drowsiness or dizziness
Section 2
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
Aerosols Category 3, Acute Toxicity (Oral) Category 4, Skin Corrosion/Irritation Category 2, Serious Eye Damage/Eye Irritation Category 2A, Specific Target Organ Toxicity - Single Exposure (Respiratory Tract Irritation) Category 3, Specific Target Organ Toxicity - Single Exposure (Narcotic Effects) Category 3
Signal word
Danger
Hazard statements
H229 Pressurised container: May burst if heated H302 Harmful if swallowed H315 Causes skin irritation H319 Causes serious eye irritation H335 May cause respiratory irritation H336 May cause drowsiness or dizziness AUH044 Risk of explosion if heated under confinement BOSSWELD is a is a registered brand of Dynaweld Industrial Supplies Pty Ltd | ABN: 64 076 580 704 | +61 2 8761 6500 1
Prevention
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking P251 Do not pierce or burn, even after use P271 Use only outdoors or in a well ventilated area P261 Avoid breathing mist/vapours/spray P264 Wash all exposed external body areas thoroughly after handling P270 Do not eat, drink or smoke when using this product P280 Wear protective gloves, protective clothing, eye protection and face protection
Response
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing P337+P313 If eye irritation persists: Get medical advice/attention P301+P312 IF SWALLOWED: Call a POISON CENTER/doctor/physician/first aider if you feel unwell P302+P352 IF ON SKIN: Wash with plenty of water and soap P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing P330 Rinse mouth P332+P313 If skin irritation occurs: Get medical advice/attention P362+P364 Take off contaminated clothing and wash it before reuse
Storage
P405 Store locked up P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50°C P403+P233 Store in a well-ventilated place. Keep container tightly closed P501 Dispose of contents/container in accordance with local regulations
Other hazards which do not result in classification
General: When this product is used in a welding process, there are a number of potential hazards. Please read and understand this Safety Data Sheet, the manufacturer’s instructions, precautionary labels and WTIA Technical Note No. 7 Health and Safety in Welding before using this product. Electric Shock Electrical shock can kill. Radiation UV, IR Radiation. Arc rays can injure eyes and burn skin Fumes: Formation of dangerous fumes during use. Inhalation of welding fumes may cause respiratory irritation, cough. Excessive or prolonged inhalation of fumes may cause metal fume fever. Heat Spatter, slag, melting metal, hot welds, arc rays and sparks can cause burn injuries to skin or damage to eyes and can also ignite combustibles and flammable materials. Noise Noises generated by welding equipment may damage the auditory system Magnetic fields: Persons with a pacemaker should not go near welding or cutting operations until they have consulted their doctor and obtained information from the manufacturer of the device. BOSSWELD is a is a registered brand of Dynaweld Industrial Supplies Pty Ltd | ABN: 64 076 580 704 | +61 2 8761 6500 2