Dynatex 49477 Red Anaerobic Gasket Maker

Dynatex a division of Soudal Accumetric

Revision date : 2018-06-12

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS05 GHS07
Health risk rating 4
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

79-10-7

Name of the chemical

acrylic acid

Concentration

N/A

EC/CAS

110-16-7

Name of the chemical

Maleic acid

Concentration

10%-25%

General Information

Revision date

2018-06-12

Product name

Dynatex 49477 Red Anaerobic Gasket Maker

Product Synonyms

49477CL09

1.2.1 Relevant identified uses

Refer to Technical Information

1.2.2. Uses advised against

Refer to Technical Information

Icons in SDS

GHS05 GHS07

Company Information

company name

Dynatex a division of Soudal Accumetric

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H302, H315, H317, H318, H332, H335

Hazard statements

Code

Statements

H302

Harmful if swallowed

H315

Causes skin irritation

H317

May cause an allergic skin reaction

H318

Causes serious eye damage.

H332

Harmful if inhaled

H335

May cause respiratory irritation

Section 2

SECTION 2: Hazards identification

Classification ACUTE TOXICITY - INHALATION - Category 4 ACUTE TOXICITY - ORAL - Category 4 SENSITIZATION - SKIN - Category 1 SERIOUS EYE DAMAGE /EYE IRRITATION - Category 1 SKIN CORROSION/IRRITATION - Category 2 SPECIFIC TARGET ORGAN TOXICITY (Single Exposure) - Category 3

Signal word

Danger

Hazard statements

Causes serious eye damage Causes skin irritation Harmful if inhaled Harmful if swallowed May cause an allergic skin reaction May cause respiratory irritation.

Response

If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If inhaled: Remove person to fresh air and keep comfortable for breathing. If on skin: Wash with plenty of water. If skin irritation occurs: Get medical advice/attention. If skin irritation or rash occurs: Get medical advice/attention. Immediately call a poison center/doctor Read label before use. Rinse mouth. Take off contaminated clothing and wash it before reuse. Wash contaminated clothing before reuse.

Prevention

Avoid breathing dust/fume/gas/mist/ vapors/spray. Contaminated work clothing must not be allowed out of the workplace. Do not eat, drink or smoke when using this product. Use only outdoors or in a well-ventilated area. Wash thoroughly after handling. Wear eye protection/face protection. Wear protective gloves.

Storage

Store in a well-ventilated place. Keep container tightly closed. Store locked up.

Disposal

Dispose of contents/container in accordance with local/regional/national /international regulations. Ingredients of unknown toxicity 0%

Additional information

None known Section 3. Ingredients CAS Ingredient Name Weight % 79-10-7 Acrylic acid 5% - 10% 25852-47-5 Polyethylene Glycol 200 Dimethacrylate 10% - 25% 110-16-7 Acrylic Acid 0.1% - 0.5% Occupational exposure limits, if available, are listed in Section 8.

2.1 Classification of the substance or mixture

ACUTE TOXICITY - INHALATION - Category 4 ACUTE TOXICITY - ORAL - Category 4 SENSITIZATION - SKIN - Category 1 SERIOUS EYE DAMAGE /EYE IRRITATION - Category 1 SKIN CORROSION/IRRITATION - Category 2 SPECIFIC TARGET ORGAN TOXICITY (Single Exposure) - Category 3 Signal Word Danger Pictogram Hazard Statements Causes serious eye damage Causes skin irritation Harmful if inhaled Harmful if swallowed May cause an allergic skin reaction May cause respiratory irritation.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.