Note: Ingredients listed on restricted chemical lists
EC/CAS
64742-54-7
Name of the chemical
Distillates (petroleum), hydrotreated heavy paraffinic; Base oil — unspecified (A complex combination of hydrocarbons obtained by treating a petroleum fraction with hydrogen in the presence of a catalyst. It consists of hydrocarbons having carbon numbers predominantly in the range of C20 through C50 and produces a finished oil of at least 19 10-6 m2.s-1 at 40 °C. It contains a relatively large proportion of saturated hydrocarbons.)
Concentration
N/A
EC/CAS
64742-55-8
Name of the chemical
Distillates (petroleum), hydrotreated light paraffinic
Concentration
N/A
EC/CAS
64742-56-9
Name of the chemical
Distillates (petroleum), solvent-dewaxed light paraffinic
Concentration
N/A
EC/CAS
64742-65-0
Name of the chemical
Distillates (petroleum), solvent-dewaxed heavy paraffinic; Base oil — unspecified (A complex combination of hydrocarbons obtained by removal of normal paraffins from a petroleum fraction by solvent crystallisation. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C20 through C50 and produces a finished oil with a viscosity of not less than 19 10-6 m2.s-1 at 40 °C.)
Concentration
N/A
EC/CAS
72623-86-0
Name of the chemical
Lubricating oils (petroleum), C15-30, hydrotreated neutral oil-based; Base oil — unspecified (A complex combination of hydrocarbons obtained by treating light vacuum gas oil and heavy vacuum gas oil with hydrogen in the presence of a catalyst in a two stage process with dewaxing being carried out between the two stages. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C15 through C30 and produces a finished oil having a viscosity of approximately 15 10-6 m2.s-1 at 40 °C. It contains a relatively large proportion of saturated hydrocarbons.)
Concentration
N/A
EC/CAS
72623-87-1
Name of the chemical
Lubricating oils (petroleum), C20-50, hydrotreated neutral oil-based; Base oil — unspecified (A complex combination of hydrocarbons obtained by treating light vacuum gas oil, heavy vacuum gas oil and solvent deasphalted residual oil with hydrogen in the presence of a catalyst in a two stage process with dewaxing being carried out between the two stages. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C20 through C50 and produces a finished oil with a viscosity of approximately 32 10-6 m2.s-1 at 40 °C. It contains a relatively large proportion of saturated hydrocarbons.)
Concentration
N/A
General Information
Revision date
2019-10-15
Product name
AC Delco Synthetic Transmission Fluid
Product Synonyms
19331044
1.2.1 Relevant identified uses
Refer to Technical Information
1.2.2. Uses advised against
Refer to Technical Information
supplier name
Dynatex a division of Soudal Accumetric
Manufacturer Name
Dynatex a division of Soudal Accumetric
Icons in SDS
Company Information
company name
Dynatex a division of Soudal Accumetric
GHS Information
Signal word
No signal word
Hazard Codes
Hazard statements (CLP)
H412
Hazard statements
Code
Statements
H412
Harmful to aquatic life with long lasting effects
Section 2
SECTION 2: Hazards identification
Hazard pictograms
No symbol
Signal word
No signal word
Physical hazards
Not classified as a physical hazard under GHS criteria
Health hazards
Not classified as a health hazard under GHS criteria
Environmental hazards
H412 Harmful to aquatic life with long lasting effects
Prevention
P273 Avoid release to the environment.
Response
No precautionary phrases.
Disposal
P501 Dispose of contents/ container to an approved waste dis- posal plant.
Other hazards which do not result in classification
Prolonged or repeated skin contact without proper cleaning can clog the pores of the skin result- ing in disorders such as oil acne/folliculitis. Used oil may contain harmful impurities. Not classified as flammable but will burn.
2.1 Classification of the substance or mixture
Long-term (chronic) aquatic : Category 3 hazard