Tungsten/Tungsten Alloys/Carbide

Hazard statements (CLP)

H317

Code

Statements

H317

May cause an allergic skin reaction

SECTION 2: Hazards identification

2.1 DESCRIPTION OF HAZARDS: As shipped, Tungsten and Carbide alloys do not present a hazard to human health and are not classified as hazardous. Fume or dust emissions released during remelting, grinding, cutting or welding or in powder form may be hazardous if inhaled or ingested or if in contact with skin or eyes. The classifications below are related to exposure to the hazardous fume or dust emissions generated when remelting, grinding, cutting or welding or when in powder form. Acute Oral Toxicity – Category 4 Respiratory Sensitizer – Category 1 Sensitization – Skin – Category 1 Carcinogenicity – Category 1B Specific Organ Toxicity – Repeated Exposure – Category 1

2.2 Label elements

Signal Word – DANGER

Hazard statements

May cause eye irritation May cause an allergic skin reaction or skin irritation May cause irritation of the upper respiratory tract May cause systemic effects or chronic effects

Precautionary statements

Prevention – Obtain special instructions before use. Do not handle until all precautions have been read and understood. Do not breathe dust, mist, fumes, vapors or powders. Use only outdoors or in well ventilated areas. Wear protective gloves, clothing, eye/face protection. Wear respiratory protection. Wash thoroughly after handling.

Response

If exposed or concerned – get medical advice or attention IF INHALED – Remove person to fresh air and keep comfortable for breathing. If experiencing respiratory symptoms call a POISON CENTER or doctor. IF ON SKIN – Wash with plenty of soap and water. If skin irritation or rash occurs, get medical advice or attention. Wash contaminated clothing before reuse. IF IN EYES – Rinse cautiously with water for several minutes. Get medical advice/attention. IF SWALLOWED – Immediately call a POISON CENTER or doctor. Rinse mouth. Storage/Disposal – Store in a secure area. Dispose of material in accordance with local, regional, national and/or international regulations.

2.3 Other hazards

Dust or powders may present an explosion hazard if allowed to accumulate in an industrial or manufacturing environment. Coatings and oils applied to the product may enhance flammability.