Note: Ingredients listed on restricted chemical lists
EC/CAS
108-95-2
Name of the chemical
Phenol
Concentration
N/A
EC/CAS
2855-13-2
Name of the chemical
3-aminomethyl-3,5,5-trimethylcyclohexylamine
Concentration
N/A
EC/CAS
100-51-6
Name of the chemical
Benzyl Alcohol
Concentration
N/A
EC/CAS
69-72-7
Name of the chemical
Salicylic acid
Concentration
N/A
General Information
Revision date
2014-08-11
Product name
As Used on Label
Product Synonyms
Clear and Pigmented (all colors) Novolac Resin
1.2.1 Relevant identified uses
As Used on Label)
Icons in SDS
Company Information
company name
Dynamic Coatings Inc.
Section 2
Appearance/Odor
Pigmented viscous liquid. Mild characteristic odor. SECTION IV - FIRE and EXPLOSION HAZARD DATA Flash Point (Closed Cup Method) Flammable Limits LEL UEL 485ºF N/A Extinguishing Media Water spray, Foam, CO2, Dry Chemicals. Special Firefighting Procedures Wear full protective equipment including self-contained breathing apparatus. Unusual Fire and Explosion Hazards Cool storage containers with water spray to prevent pressure build-up that may rupture the containers. Combustion products may be toxic. SECTION V - REACTIVITY DATA Stability Unstable Conditions to Avoid Stable X Excess heating over long periods of time degrades the resin. Incompatibility (Materials to Avoid) Uncontrolled reaction with amines. Hazardous Decomposition or Byproducts By Fire - Carbon monoxide, Carbon dioxide, Nitrogen oxides, Aldehydes. May Occur Conditions to Avoid Hazardous Polymerization Will Not Occur X Uncontrolled reaction with amines. SECTION VI - HEALTH HAZARD DATA
Principle Routes of Exposure
Inhalation? Skin? Ingestion? YES Signs and Symptoms of Exposure Irritation of skin.
Health hazards
Acute and Chronic) ACUTE - Irritation of skin and dermatitis. CHRONIC - Repeated overexposure will cause severe skin irritation, dermatitis and sensitization. Sensitized persons may experience rapid irritation of skin upon exposure. Persons with lung disorders or who are sensitized should not use this product. Carcinogenicity: NTP? IARC Monographs? OSHA Regulated? NO
Medical Conditions Generally Aggravated by Exposure
Allergy, skin disorders. Emergency and First Aid Procedures EYES - Flush with water, holding lids open for 15 minutes or more. Call physician for advice if necessary. SKIN - PROMPTLY wash with soap and water. DO NOT wash with solvents. Seek medical advice if irritation develops or persists. INHALATION - Move person to fresh air if effects occur. If needed, give oxygen or artificial respiration to improve breathing . Consult physician. INGESTION - Get medical attention immediately. Never give liquids to an unconscious or convulsing person. SECTION VII - CONTROL MEASURES Respiratory Protection (Specify Type) Provide adequate exhaust ventilation; use a NIOSH approved respirator if PELS/TLVS are exceeded. Ventilation Local Exhaust If needed. Special None known. Mechanical Adequate exhaust ventilation must exhaust AWAY from applicator. Protective Gloves Natural rubber or Neoprene. Eye Protection Splash goggles or face shield. Other Protective Clothing or Equipment Use rubber apron, face shield and appropriate clothing to prevent contact with skin. Launder contaminated clothing before reuse. Discard contaminated leather shoes and canvas sneakers. Protective skin creams help cleaning with soap and water, gloves must still be worn. An eye wash station or an adequate supply of clean water must be available at work area. Work/Hygienic Practices Enforce careful handling to prevent splashing. Wash thoroughly after use. SECTION VIII - PRECAUTIONS FOR SAFE HANDLING AND USE Steps to be Taken in Case Material is Released or Spilled Wear protective equipment to prevent exposure. Stop spill and dike to prevent spreading. Cover spill with absorbent materials and collect into containers. Clean contaminated area with detergent and water or a steam cleaner for best results. Waste Disposal Method Dispose in accordance with Federal, State and Local requirements. Precautions to be Taken in Handling and Storing Keep containers tightly closed when not in use. Other Precautions NONE KNOWN. Prepared by Murty Bhamidipati PLEASE "The above information is accurate to the best of our knowledge. However, since data, safety standards, and government regulations are subject to change and the conditions of handling and use, or misuse, are beyond our control, Dur-A-Flex, Inc. MAKES NO WARRANTY, EITHER EXPRESS OR IMPLIED, NOTE WITH RESPECT TO THE COMPLETENESS OR CONTINUING ACCURACY OF THE INFORMATION CONTAINED HEREIN AND DISCLAIMS ALL LIABILITY FOR RELIANCE THEREON. User should satisfy himself that he has all current data relevant to his particular use." SECTION I - IDENTIFICATION 0 = Least Flammability 1 Dur-A-Glaze #4 Hardener: Regular, Fast, Cold 1 = Slight 0 IDENTITY (As Used on Label) Cure, CR4, Damp-Primer, Water Clear 2 = Moderate Reactivity 3 = High COMMON NAME Epoxy Resin Curatives 4 = Extreme Personal Protection G SECTION II - PRODUCT COMPONENTS CAS.# OSHA PEL ACGIH TLV Benzyl Alcohol 100-51-6 N.E.1 N.E. 3, Aminomethyl -3,5,5-Trimethyl 2855-13-2 N.E. 1, 5 Pentanediamine, 2 Methyl 15520-10-2 N.E. N, Aminoethyl Piperazine 140-31-8 N.E. Diglycidyl Ether Bisphenol A Epoxy Resin 25085-99-8 N.E. Salicylic Acid 69-72-7 N.E. 1, 5 Pentanediamine, 2 Methyl 15520-10-2 N.E. Benzene-1,3-Dimethaneamine 1477-550 N.E. Phenol 108-95-2 N.E. Triphenyl phosphite 101-02-0 N.E. 1None Established T.S.C.A. Status - O.K. on all above components. *FOR SPILL, LEAK, FIRE, OR ACCIDENT, CALL CHEMTREC 24-HOUR EMERGENCY NUMBER 1-800-424-9300* SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS Boiling Point 485ºF Specific Gravity (H2O = 1) <1 Vapor Pressure (mm Hg) 0.02 Melting Point N/A Vapor Density (AIR = 1) N/A Evaporation rate (Butyl Acetate = 1) N/A Volatile Organic Compounds (VOC) 0 g/l Solubility in Water Partially soluble. Appearance and Odor Pale yellow colored liquid. Amine odor. SECTION IV - FIRE and EXPLOSION HAZARD DATA Flash Point (Closed Cup Method) Flammable Limits LEL UEL 220ºF N/A Extinguishing Media Dry chemicals, carbon dioxide, foam, water spray. Special Firefighting Procedures Firefighters should wear full emergency equipment with self-contained breathing apparatus. Irritating gases may be generated by fire. Unusual Fire and Explosion Hazards Cool exposed containers with cold water spray to prevent pressure buildup that may rupture the containers. SECTION V - REACTIVITY DATA Stability Unstable Conditions to Avoid Stable X Keep container closed when not in use. Incompatibility (Materials to Avoid) Strong oxidizers and acids. Hazardous Decomposition or Byproducts By Fire- carbon monoxide, carbon dioxide, aldehydes, nitrogen. Conditions to Avoid Hazardous May Occur Uncontrolled reaction with epoxy resins. Avoid breathing fumes PolymerizatioWill Not Occur X generated by hardener and epoxy mixture when not used within established pot life. SECTION VI - HEALTH HAZARD DATA Route(s) of Entry: Inhalation? Skin? Ingestion? YES Signs and Symptoms of Exposure Irritation on skin. Health Hazards (Acute and Chronic) Note: Persons with lung disorders or who are sensitized should not use this product. ACUTE - Irritation on skin and dermatitis. CHRONIC - Repeated overexposure will cause severe skin irritation, dermatitis and sensitization. Sensitized persons may experience rapid irritation of skin upon exposure. Carcinogenicity: NTP? IARC Monographs? OSHA Regulated? NO Medical Conditions Generally Aggravated by Exposure Allergy, skin disorders.