Dur-A-Plex ESX 500-B

2.1 Classification of the substance or mixture

HMIS® rating (product as packaged): Health: 2 Fire: 1 Reactivity: 1 PPE: H Note: Respiratory protection is only recommended in the event that ventilation or engineering controls are unable to maintain exposures below recommended levels; or in the event of a spill or other emergency response situation. (HMIS codes are based on contact with the product as packaged and any hydrolysis by­ products, if present.) Hazardous Materials Identification System and HMIS are registered trademarks of the National Paint and Coatings Association.

WHMIS Classification

B3, E 3.1 3.2 Emergency overview and potential hazards

Signal word

DANGER

Physical hazards

Combustible liquid and vapor.

Potential Acute Health Effects

Route of entry or possible contact: eyes , skin , inhalation (hydrolysis products) , ingestion Eye contact: Causes eye burns. Skin contact: Causes skin burns. Inhalation: If inhaled as aerosol lung damage can be expected. Aerosols prepared from aqueous emulsions or organic solutions of aminoalkyl­functional silanes may be dangerous to health referring to animal tests. Ingestion: Not expected in industrial use. May be harmful if swallowed. Additional information on acute health effects: This material releases ethanol upon hydrolysis. Ethanol (CAS­No. 64­17­5) is an irritant to the eyes and mucous membranes. Overexposure has been shown to cause central nervous system depression. Direct contact with the eyes will cause burning and stinging.

Further information

Medical conditions which may be aggravated by exposure: unknown Target organs affected: See section 11.2 Toxicity data ­ Additional Information / Comments. arcinogens/Reproductive toxins: There are no carcinogenic ingredients present at or over 0.1% in this material. This material does not contain any reproductive toxins at or above OSHA or WHMIS reportable levels. See Section 11 for Toxicological Information, if any.