Ductile Irons and Gray Irons

Hazard statements (CLP)

H303, H315, H317, H320, H334, H341, H370, H401

Code

Statements

H303

May be harmful if swallowed

Hazard statements

Cast iron products in their natural state do not present inhalation, ingestion or contact hazards However, dust or fumes from machining, cutting, grinding, welding, brazing, flame cutting and arc gouging will release contaminants into the air, with inhalation as the primary route of entry. Since the castings are primarily iron, the dust and fume generated from the working of these castings will be primarily iron or iron oxide. EMERGENCY OVERVIEW REPRESENTS HAZARDOUS COMPONENTS THAT CAN BE RELEASED DURING PROCESSING. OSHA HAZARDOUS Target Organ Target Organ Effect: Eye Irritant Skin Irritant/Sensitizer Respiratory Irritant/Sensitizer Kidney, Respiratory, Skin Target Organ Effect

2.2 Label elements

Health Environmental Physical Acute Toxicity, Oral Category 2 Acute Aquatic Toxicity Category 1 Not Classified Skin Irritant Category 2 Chronic Aquatic Toxicity Category 1 Serious Eye Irritant Category 2B Respiratory Sensitization Category 1 Target Organ Toxicity (kidney, respiratory, skin) Category 1

Signal word

Danger

Precautionary statements

H303 Maybe harmful if swallowed P281 Wear protective gloves/protective clothing/eye H315 Causes skin irritation protection/face protection H320 Causes eye irritation P260 Do not breath dust/fume/gas/mist/vapors/spray H334 May cause allergy or asthma symptoms or P285 In case of inadequate ventilation wear breathing difficulties if inhaled respiratory protection H317 May cause an allergic skin reaction P305+P351+P338 IF IN EYES: Rinse cautiously H341 Suspected of genetic defects with water for several minutes. Remove contact H370 Causes damage to organs (kidneys, respiratory) lenses, if present and easy to do. Continue H401 Toxic to Aquatic Life rinsing. P273 Avoid release to the environment

Potential health effects

Acute Exposure Inhalation Inhalation of high concentrations of metal dust or fume for short periods of time can cause irritation to the eyes, nose and throat. Metal fume fever can also occur, with symptoms of metallic taste, dryness of the mouth, throat irritation and chills and fever, which usually lasts for 12 to 48 hours. Chronic Exposure by Principle Elements Carbon: Prolonged and repeated over-exposure (Inhalation) may lead to benign pneumoconiosis. Copper: Fumes may cause metal fume fever, with flu-like symptoms and hair and skin discoloration. Keratinization of the hands and feet has been reported. Systemically, dust and fume cause irritation of the upper respiratory tract, metallic taste and nausea. Iron: Iron oxide dust or fumes may cause benign pneumoconiosis (siderosis). This disease may make x-ray diagnosis of other lung conditions difficult or impossible, but causes little or no disability. Manganese: Chronic manganese poisoning may result from inhalation of dust and fume. The central nervous system is the chief site of injury. This is not a fatal disease, although it is extremely disabling. Some persons may be hypersusceptable to manganese. Freshly formed manganese fume has caused fever and chills, similar to metal fume fever. Silicon: Accumulation in lungs can cause benign pneumoconiosis, but is not considered to be responsible for pulmonary functional impairment or respiratory symptoms. Molybdenum: Particulate affects the eyes and respiratory system and may also damage the liver and kidneys. Tin: Prolonged or repeated skin contact may cause dermatitis. Chronic exposure to tin oxide dusts and fume may result in stannosis (benign pneumoconiosis)