Note: Ingredients listed on restricted chemical lists
EC/CAS
5124-30-1
Name of the chemical
4,4'-methylenedicyclohexyl diisocyanate
Concentration
10-20%
EC/CAS
822-06-0
Name of the chemical
Hexamethylene diisocyanate
Concentration
<0.15%
General Information
Revision date
2014-01-09
Product name
Poly-Crete Color-Fast Hardener
1.2.1 Relevant identified uses
Floor Surfacing
Manufacturer Name
Dur-A-Flex, Inc
Emergency telephone
1-800- 424-9300
Icons in SDS
Company Information
company name
Dur-A-Flex, Inc
Hazard Codes
Hazard statements (CLP)
H315, H317, H319, H335
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
This product is one part of a 3 part product. Read and understand the hazard information on the MSDS for Poly- Crete Colorfast Resin before using this product. Classification Physical Not Hazardous Health Acute Toxicity Category 3 – Inhalation Skin Irritation Category 2 Eye Irritation Category 2 Skin Sensitization Category 1 Respiratory Sensitization Category 1 Specific Target Organ Toxicity – Single Exposure Category 3 (Respiratory Irritation) Labeling: Danger! Hazard statement(s) Toxic if inhaled. Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation
Precautionary statements
Avoid breathing mist, vapors and spray. Wash thoroughly after handling. Use only outdoors or in a well-ventilated area. Contaminated work clothing should not be allowed out of the May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause respiratory irritation. workplace. Wear protective gloves, eye protection and face protection. In case of inadequate ventilation wear respiratory protection. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor IF ON SKIN: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical attention. Take off contaminated clothing and wash it before reuse. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor. Store in a well-ventilated place. Keep container tightly closed. Store locked up. Dispose of contents and container in accordance with local and national regulations.
2.1 Classification of the substance or mixture
Physical Health Not Hazardous Acute Toxicity Category 3 – Inhalation Skin Irritation Category 2 Eye Irritation Category 2 Skin Sensitization Category 1 Respiratory Sensitization Category 1 Specific Target Organ Toxicity – Single Exposure Category 3 (Respiratory Irritation)
