ChromaOne ) High Solids Binders, Activators and Reducers

SECTION 2: Hazards identification

INGREDIENTS CAS # VAPOR PRESSURE EXPOSURE LIMITS 96591-17-2 None A None, O None 1,2,4-trimethyl benzene 95-63-6 7.0@44.4°C A 25.0 ppm, O 25.0 ppm 2,6-dimethyl-4-heptanol 108-82-7 None A None, O None 4,6-dimethyl-2-heptanone 19549-80-5 None A None, O None Acetone 67-64-11 247.0@68.0°F A 750.0 ppm 15 min STEL, A 500.0 ppm, O 1000.0 ppm, D 500.0 ppm 8 & 12 hour TWA Acrylic polymer NotAvail None A None, O None Aliphatic polyisocyanate resin 28182-81-2 None S 0.5 mg/m3, A None, O None Aromatic hydrocarbon 64742-95-6 10.0@25.0°C D 50.0 ppm, A None, O None Bis(1 ,2,2,6,6-pentamethy|l-4-piperidinyl) 41556-26-7 None A None, O None sebacate Butyl acetate 123-86-4 10.0 A 200.0 ppm 15 min STEL, A 150.0 ppm, O 150.0 ppm Cumene 98-82-8 3.7 A 50.0 ppm, O 50.0 ppm Skin Diisobutyl ketone 108-83-8 1.8 A 25.0 ppm, O 50.0 ppm Ethyl acetate 141-78-6 100.0 A 400.0 ppm, O 400.0 ppm Ethyloenzene 100-41-4 7.0 A 20.0 ppm, O 100.0 ppm, D 25.0 ppm 8 & 12 hour TWA Ethylene glycol monobutyl ether acetate 112-07-2 03 A 20.0 ppm, D 20.0 ppm 8 & 12 hour TWA , O None Heptane 142-82-5 45.0@66.0 °F A 500.0 ppm 15 min STEL, A 400.0 ppm, O 500.0 ppm Hydrotreated heavy naphtha (petroleum) 64742-47-8 3.3@68.0°F A None, O None Methyl amy! ketone 110-43-0 3.4 A 50.0 ppm, O 100.0 ppm Methyl ethyl ketone 78-93-3 71.2 A 300.0 ppm 15 min STEL, A 200.0 ppm, O 200.0 ppm, D 300.0 ppm 15 min TWA, D 200.0 ppm 8 & 12 hour TWA Polyester resin-A 129922-22-1 None A None, O None Polyester resin-B 71010-58-7 None A None, O None Propylene glycol monomethyl ether ac- 108-65-6 3.8 D 30.0 ppm 15 min TWA, A None, O None etate Substituted benzotriazole 25973-55-1 None A None, O None Xylene 1330-20-7 8.0@25.0°C A 150.0 ppm 15 min STEL, A 100.0 ppm, O 100.0 ppm, D 150.0 ppm 15 min STEL, D 100.0 ppm 8 & 12 hour TWA *A=ACGIH, O=OSHA, D=DuPont, S=Suppliers. Limits are 8 hour TWA unless otherwise specified. Vapor pressure @ 20° C unless otherwise noted.