; ELVALOY AC 1125 resin

SECTION 2: Hazards identification

OSHA Hazards Product hazard category Combustible dust Label content

Hazard pictograms

| > not required

Signal word

Warning Skin contact The material is not likely to be hazardous by skin contact, but cleaning the skin after use is advisable. Cool skin rapidly with cold water after contact with molten material. Do not attempt to remove material from the skin. Obtain medical treatment for thermal burn. Wash contaminated clothing before reuse. Eye contact In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Call a physician. Ingestion Not a probable route of exposure. However,.in case of accidental ingestion, call a physician. | Most important No applicable data available. symptoms/effects, acute and delayed — | Protection of first-aiders No applicable data available.. Notes to physician No applicable data available. SECTION 5. FIREFIGHTING MEASURES Suitable extinguishing media Water, Foam, Dry chemical, Carbon dioxide (CO2) Unsuitable extinguishing No applicable data available. | media Specific hazards Avoid generating dust; fine dust dispersed in air in sufficient concentrations, and in the presence of an ignition source is a potential dust explosion hazard. Pneumatic conveying and other mechanical handling operations can generate combustible dust. To reduce the potential for dust explosions, do not permit dust to accumulate. Material in pellet form may accumulate static charge when poured from one container to another. Special protective equipment Wear self-contained breathing apparatus and protective suit. for firefighters

Further information

The solid polymer can only be burned with difficulty. Evacuate personnel and keep upwind of fire. Grounding and elimination of the static charge is recommended. A E LVALO Y® A C112 5 re sin . ce | ve 2 Oe oe a & ; — | - ee Ref. 130000021354 ventilation to maintain the concentration of vapors and fumes below exposure limits. Local exhaust ventilation is preferred. Use static controls. Static charges can cause explosions in solvent and dust laden atmospheres. See Bulletin "Proper Use of Local Exhaust Ventilation During Processing of Plastics". Follow processing recommendations on the product data sheet. Personal protective equipment Respiratory protection A respiratory protection program that meets country requirements must be followed whenever workplace conditions warrant respirator use. Consult the respirator manufacturer to determine the appropriate type of equipment for a given application. Observe respirator use limitations specified by the manufacturer.