Note: Ingredients listed on restricted chemical lists
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
N/A
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
N/A
EC/CAS
13674-84-5
Name of the chemical
Tris(2-chloro-1-methylethyl) phosphate
Concentration
N/A
EC/CAS
106-97-8
Name of the chemical
n-Butan, enthält 0,1% Butadien
Concentration
N/A
General Information
Revision date
2016-10-10
Product name
D800 PU Foam
Chemical name
Poly-isocyanate/ Diol
supplier name
Dunlop Adhesives (Thailand) Limited
Icons in SDS
Company Information
company name
Dunlop Adhesives (Thailand) Limited
GHS Information
Signal word
Danger
Section 2
SECTION 2: Hazards identification
2.1 Distinguish of chemical: Flammable. Danger of Physical: No information. Danger of Health : - Way of Exposure : Skin , eyes, mouth and respiration irritating. - Local effect skin, eyes, mucous membrane irritate. - Effect of overexposure short- term : Have a headache , feel nauseated , dizzy and feel drowsiness. - Effect of overexposure long- term : Contact with skin get feel dermatitis. Evaporation of volatile have to a central nervous. May causes damage to organs through prolonged or repeated exposure) 2.2 Danger of Symbol :
Signal word
Danger
Hazard statements
F+ Extremely flammable Xn Harmful R 20 Harmful by inhalation R 36/37/38 Irritating to eyes, respiratory system and skin R 42/43 May causes sensitization by inhalation and skin contact
Remarks
Not can regard specific all danger of organ and contact chemical. Caution / Danger Protective. Ventilation: Institute in well ventilated. Respiratory Protection Type : Wear of Mask filter chemical especially Gas type NPF400gas but stay in Poor ventilation wear respirator type air tank NPF 2000 standard. Hand Protection: Wear of gloves made by nitrite. Eyes protection : Wear safety glasses. Other Protection : Full protection clothing and safety shoes. Attention : Aerosol container is pressurized and storing temperature cannot exceed +50 C. The fresh foam sticks in skin and other surface easily. Exposed places : Eyes, Skin, Ingestion, inhalation Main exposure : Agent irritating skin, eyes and mucous membrane Symptoms related to product use: Inhalation: Vaper may irritate nose and upper respiratory system Contact with Skin: May cause local irritation, reddening, swelling Contact with Eyes: May irritate eyes. For its adhesive feature, the foam contact with eyes may cause their physical damage. Ingestion: May cause irritation of mucous membranes in oral cavity and digestive system. The medical condition, That may deteriorate through the contact with product : non known.