Sarlink 3160NAT

Remarks

The components of this product are embedded in an impervious polymer matrix and are therefore not biologically available.Any hazardous constituents are fixed in the polymer matrix and therefore present a negligible exposure risk under normal conditions of processing and handling.Additives contained in this product do not pose a risk to health unless they are liberated during processing (fumes from melting, dusts).Suitable Industrial Hygiene precautions should be implemented to prevent (respirable) dust and fume exposures.Exposure to (melting) fumes should be kept as low as possible, using suitable ventilation equipment.Dusts and fumes created from secondary processing may be irritating to respiratory tract and skin and should be considered as potentially hazardous.If user operations generate dust, fumes or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit. Section 3. Hazards identification Physical state Solid. [Granules] Emergency overview NOT EXPECTED TO PRODUCE SIGNIFICANT ADVERSE HEALTH EFFECTS WHEN THE RECOMMENDED INSTRUCTIONS FOR USE ARE FOLLOWED. No known significant effects or critical hazards. Avoid prolonged contact with eyes, skin and clothing. HCS Classification Not regulated. | OSHA/HCS status While this material is not considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200), this MSDS contains valuable information critical to the safe handling and proper use of the product. This MSDS should be retained and available for employees and other users of this product. Potential acu alth e Eyes May cause eye irritation. (redness). Skin Heated material can cause thermal burns resulting in pain, redness, blistering. Ingestion There is no known acute effect after over-exposure to this product. Potential chronic heatth CARCINOGENIC EFFECTS: Classified A4 (Not classifiable for humans or animals.) by effects ACGIH, 3 (Not classifiable for humans.) by IARC [Talc]. Classified A4 (Not classifiable for humans or animals.) by ACGIH [zinc oxide]. MUTAGENIC EFFECTS: Not available. TERATOGENIC EFFECTS: Not available. Medical conditions None known. aggravated by over-exposure Remarks Hazard of slipping on spilled product.Heated material can cause thermal burns.Electrostatic charging can occur during unloading or processing of this material. If necessary take precautionary measures against static discharges.Appropriate precautions should be taken if the product is subjected to secondary processing.If user operations generate dust, fumes or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit. Dust may cause mechanical irritation. See toxicological information (section 11)