Note: Ingredients listed on restricted chemical lists
EC/CAS
872-50-4
Name of the chemical
N-Methyl-2-Pyrrolidone; 1-methyl-2-pyrrolidone (NMP)
Concentration
N/A
General Information
Revision date
2014-06-02
Product name
NeoPac E-106
supplier name
DSM Coating Resins, Inc
Icons in SDS
Company Information
company name
DSM Coating Resins, Inc
e-mail address of the competent person responsible for the Safety Data Sheet
DSMRESINS.SDS@dsm.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H360
Hazard statements
Code
Statements
H360
May damage fertility or the unborn child
Section 2
SECTION 2: Hazards identification
29 CFR 1910.1200) OSHA/HCS status : This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200).
2.1 Classification of the substance or mixture
TOXIC TO REPRODUCTION (Unborn child) - Category 1B
Signal word
Danger
Hazard statements
H360 - May damage the unborn child.
Prevention
P201 - Obtain special instructions before use. P202 - Do not handle until all safety precautions have been read and understood. P281 - Use personal protective equipment as required.
Response
P308 + P313 - IF exposed or concerned: Get medical attention.
Storage
P405 - Store locked up.
Disposal
P501 - Dispose of contents and container in accordance with all local, regional, national and international regulations.
Supplemental label elements
Do not taste or swallow. Avoid contact with skin and clothing. Wash thoroughly after elements handling.
2.3 Other hazards
Causes digestive tract burns. Prolonged or repeated contact may dry skin and cause irritation. Hazardous Material Health * 2 Information System (U.S.A.) Flammability 1
Physical hazards
0 PERSONAL PROTECTION The PPE (Personal Protection Equipment) designation in the HMIS is provided for use by employees at supplier sites only. Other users of this product are encouraged to evaluate the hazards of the product and assign PPE that is applicable to their specific situations. Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4 representing significant hazards or risks Although HMIS® ratings are not required on SDSs under 29 CFR 1910.1200, the preparer may choose to provide them. HMIS® ratings are to be used with a fully implemented HMIS® program. HMIS® is a registered mark of the National Paint & Coatings Association (NPCA). HMIS® materials may be purchased exclusively from J. J. Keller (800) 327-6868. The customer is responsible for determining the PPE code for this material.
