General Information
Version
003 / EN
Revision date
2019-07-15
Product name
Bausch Occlusion-Spray BK 285, BK 286, BK 287, BK 288
Product name
Bausch Occlusion-Spray BK 285, BK 286, BK 287, BK 288
Identification on the label/Trade name
Bausch Arti-Spray blue, green, red and white
1.2.1 Relevant identified uses
Universal color indicator to test the occlusal contacts and accurate fit of crowns and bridges
Emergency telephone
Peter Bausch (CEO) Phone +49 (0)221-70936-20, Mobile +49 (0)172-2601451
Icons in SDS
Company Information
company name
Dr. Jean Bausch GmbH & Co. KG
e-mail address of the competent person responsible for the Safety Data Sheet
info@bauschdental.de
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H220, H222, H229, H280
Hazard statements
Code
Statements
H220
Extremely flammable gas
H222
Extremely flammable aerosol
H229
Pressurized container: may burst if heated
H280
Contains gas under pressure; may explode if heated
Section 2
SECTION 2: Hazards identification
Hazard categories
GHS02 flame Flammable Aerosol 1 H222-H229 Extremely flammable aerosol. Pressurized container: May burst if heated.
EU Classification
Directive No 67/548/EEC or to Directive No 1999/45/EC F+; Extremely flammable R12: Extremely flammable. Information concerning particular hazards for human and environment: The product hast o be labelled due to the calculation procedure of the „General Classification guideline for preparations of the EU“ in the latest valid version. Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50°C. Do not pierce or burn, even after use. Keep out of the reach of children.
Classification system
The classification is according to the latest editions oft he EU-lists, and extended by company and literature data.
2.2 Label elements
2.2.1 Labeling
Hazard pictograms
GHS02
Signal word
Danger
Hazard statements
H222-H229 Extremely flammable aerosol. Pressurized container: May burst if heated.
Precautionary statements
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P211 Do not spray on an open flame or other ignition source. P251 Do not pierce or burn, even after use. P271 Use only outdoors or in a well-ventilated area. P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
Additional information
Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50°C/122°F. Do not pierce or burn, even after use. Do not spray on a naked flame or any incandescent material. Keep away from sources of ignition - No smoking. Keep out of the reach of children. For the wording of the listed risk phrases refer to section 16 Section 4: First aid measures 4.1 Description of first aid measures 4.1.1 General information Remove contaminated clothing immediately. Or a doctor in case of complaints. 4.1.2 After inhalation Supply fresh air; consult a doctor in case of complaints. 4.1.3 After skin contact Generally the product does not irritate the skin. 4.1.4 After eye contact Remove contact lense(s) from eye(s). Rinse opened eye for several minutes under running water. Consult a doctor in case of complaints. 4.1.5 After swallowing If symptoms persist consult doctor. 4.2 Information for the doctor 4.2.1 Most important symptoms and effects, both acute and delayed No further relevant information available. 4.2.2 Indication of any immediate medical attention and special treatment needed No further relevant information available. SECTION 5: Firefighting measures 5.1 Extinguishing media Suitable extinguishing agents: CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam. For safety reasons unsuitable extinguishing agents: Water with full jet. 5.2 Special hazards arising from the substance or mixture No further relevant information available. 5.3 Advice for firefighters Protective equipment: No special measures required. SECTION 6: Accidental release measures 6.1 Personal precautions, protective equipment and emergency procedures Wear protective equipment. Keep unprotected persons away. 6.2 Environmental precautions No special measures required. 6.3 Methods and material for containment and cleaning up Ensure adequate ventilation. 6.4 Reference to other sections See Section 7 for information on safe handling. See Section 8 for information on personal protection equipment. See Section 13 for disposal information. SECTION 7: Handling and storage 7.1 Handling Precautions for safe handling Ensure good ventilation/exhaustion at the workplace. Open and handle receptacle with care. Information about fire - and explosion protection Do not spray onto a naked flame or any incandescent material. Keep ignition sources away - Do not smoke. Protect against electrostatic charges. 7.2 Conditions for safe storage, including any incompatibilities The lists valid during the making were used as basis 8.2 Exposure controls 8.2.1 Personal protective equipment General protective and hygienic measures: Wash hands before breaks and at the end of work. Do not inhale gases / fumes / aerosols. Respiratory protection: Use suitable respiratory protective device (Not necessary if room is well-ventilated). Protection of hands: Not required. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed. As protection from splashes gloves made of the following materials are suitable: Natural rubber, NR Butyl rubber, BR Nitrile rubber, NBR Eye protection: Tightly sealed goggles SECTION 9: Physical and chemical properties 9.1 Information on basic physical and chemical properties 9.1.1 Appearance Form Aerosol. Colour Different according to colouring. Odour Pleasant. Odour threshold Not determined. 9.1.2. Safety-relevant basic data Value pH-value (20°C) Not determined. Melting point/Melting range -159,4°C Boiling point/Boiling range/-bereich -44°C Flash point Not applicable, as aerosol. Flammability (solid, gas) Not applicable. Ignition temperature 460°C Decomposition temperature Not determined. Auto-ignition temperature Product is not selfigniting. Explosive properties Not determined. Explosion limits Lower 1,8 Vol % (Propan/Butan) Upper 8,5 Vol % (Propan/Butan) Vapour pressure (20°C): 3000hPa Density (20°C) 0,6 g/cm3 Relative density Not determined. Vapour density (air=1) Not determined. Evaporation rate: Not applicable. Solubility in /Miscibility with water (20°C): Not miscible or difficult to mix. Partition coefficient (n-octanol/water) Not determined. Viscosity Dynamic Not determined. Kinematic Not determined. Solvent content Organic solvents 0,0% VOC (EC) 95% Solids content <5%
PBT Substances
Not applicable
vPvB Substances
Not applicable Section 3: Zusammensetzung/Angaben zu Bestandteilen 3.1 Substance The product is a mixture. 3.2 Mixtures 3.2.1 Description/Chemical Charakterization Mixture of substances listed below with nonhazardous additions.
Hazardous Ingredients
CAS: 75-28-5 isobutane F+ R12 50-100% EINECS: 200-857-2 Flam. Gas 1, H220; Press. Gas, H280
Storage
Store in a cool location. Observe official regulations on storing packagings with pressurized containers. Information about storage in one common storage facility Not required. Further information about storage conditions Keep container tightly sealed. Do not seal receptacle gas tight. Store in cool, dry conditions in well sealed receptacles. Protect from heat and direct sunlight. Storage class 2B Specific end use(s) No further relevant information available. SECTION 8: Limiting exposure controls / personal protection 8.1 Control parameters Ingredients with limit values that require monitoring at the workplace The product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace.
Further information
No further relevant information available. SECTION 10: Stability and reactivity 10.1 Reactivity No further relevant information available. 10.2 Chemical stability Thermal decomposition / conditions to be avoided No decomposition if used according to specifications. 10.3 Possibility of hazardous reactions No dangerous reactions known. 10.4 Conditions to avoid No further relevant information available. 10.5 Incompatible materials No further relevant information available. 10.6 Hazardous decomposition products No dangerous decomposition products known.