Note: Ingredients listed on restricted chemical lists
EC/CAS
811-97-2
Name of the chemical
1,1,1,2-Tetrafluoroethane
Concentration
N/A
General Information
Revision date
2011-05-05
Product name
STYROFOAM(TM) 2.00 x 24 Inch Panel Core 20 -
Emergency telephone
989-636-4400
Icons in SDS
Company Information
company name
The Dow Chemical Company
e-mail address of the competent person responsible for the Safety Data Sheet
SDSQuestion@dow.com
Section 2
SECTION 2: Hazards identification
29 CFR 1910.1200) Emergency Overview Color: Blue Physical State: Board Odor: Odorless Hazards of product: Toxic fumes may be released in fire situations. OSHA Hazard Communication Standard This product is not a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200.
Potential health effects
Eye Contact: Solid or dust may cause irritation due to mechanical action. Fumes/vapor released during thermal operations such as hot-wire cutting may cause eye irritation. Skin Contact: Essentially nonirritating to skin. Mechanical injury only. Skin Absorption: Skin absorption is unlikely due to physical properties. ®(TM)*Trademark of The Dow Chemical Company ("Dow") or an affiliated company of Dow Inhalation: Dust may cause irritation to upper respiratory tract (nose and throat). Fumes/vapors released during thermal operations such as hot wire cutting may cause respiratory irritation. Concentrations of the blowing agents anticipated incidental to proper handling are expected to be well below those which cause acute inhalation effects and below exposure guidelines. Ingestion: Swallowing is unlikely because of the physical state. Very low toxicity if swallowed. Harmful effects not anticipated from swallowing small amounts. May cause choking or blockage of the digestive tract if swallowed. Birth Defects/Developmental Effects: Contains component(s) which did not cause birth defects in animals; other fetal effects occurred only at doses toxic to the mother. The component(s) is/are: 1,1,1,2-Tetrafluoroethane. Testing has indicated that normal handling and cutting are unlikely to result in exposure levels sufficient to cause the listed effects.