Note: Ingredients listed on restricted chemical lists
EC/CAS
14807-96-6
Name of the chemical
Talc
Concentration
N/A
EC/CAS
90-72-2
Name of the chemical
2,4,6-tris(dimethylaminomethyl)phenol
Concentration
N/A
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
N/A
General Information
Revision date
2017-05-09
Product name
XPST Part B SURE SEAL Plastic Surgery - FLEXIBLE
Chemical name
Mercaptan
1.2.1 Relevant identified uses
Curing Agent for Epoxy adhesive / sealant
Emergency telephone
CANUTEC : (613) 996-6666
Icons in SDS
Company Information
company name
Dominion Sure Seal Ltd
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H315, H318, H335, H351
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
2.1 Classification of the substance or mixture
The classification and label elements stated below were prepared in accordance with the USA OSHA Hazard Communication Standard (29 CFR 1910.1200; Hazcom 2012) and the Canadian WHMIS regulations (Hazardous Products Regulations; WHMIS 2015). This information may be different from the actual product label information for labels that are regulated by other agencies.
Health hazards
Eye Corrosion, Category 1 Skin Irritation, Category 2 Target Organ Toxicity (Single exposure), Category 3 (Respiratory Tract Irritation) Carcinogenicity, Category 2 mark
Physical hazards
Not classified
2.2 Label elements
Hazardous components for labelling: Mercaptan terminated polymer, 2,4,6-Tris(dimethylaminomethyl) phenol and Titanium dioxide. Corrosion Exclamation
Signal word
DANGER
Hazard statements
H318: Causes serious eye damage. H315: Causes skin irritation. H335: May cause respiratory irritation. H351: Suspected of causing cancer.
Prevention
P201: Obtain special instructions before use. P202: Do not handle until all safety precautions have been read and understood. P261: Avoid breathing dust or vapours. P271: Use only outdoors or in a well-ventilated area. P264: Wash hands thoroughly after handling. P280: Wear protective gloves and eye protection.
Response
P308+P313 IF exposed or concerned Get medical advice/ attention P302+P352 IF ON SKIN Wash with plenty of soap and water P332+P313 If skin irritation occurs Get medical advice/attention P362+P364: Take off contaminated clothing and wash it before reuse. P305+P351+P338 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310: Immediately call a POISON CENTER or doctor/physician. P304+P340 IF INHALED Remove person to fresh air and keep comfortable for breathing P312: Call a POISON CENTER or doctor/physician if you feel unwell.
Storage
P403+P233: Store in a well-ventilated place. Keep container tightly closed. P405: Store locked up.
Disposal
P501: Dispose of contents/container in accordance with applicable local, regional and/or national regulations.
2.3 Other hazards
No data available Emergency Overview Immediate concerns: Causes eye damage. Causes skin irritation. May cause respiratory irritation. Vapors may have a strong offensive odor which may cause headaches, nausea and vomiting. Suspected of causing cancer by dust inhalation. Comments: See sections 9 and 10 for more detailed information on physicochemical effects. See section 11 for more detailed information on health effects. See sections 12 for more detailed information on environmental effects. The actual container label may not include the above label elements. The labeling shown above applies to products used solely for industrial / professional use. Consumer products should be labeled in accordance with the Canadian Consumer Chemicals and Containers Regulations and US Consumer Product Safety Commission regulations. Consumer product labeling takes precedence over Canadian WHMIS 2015 and OSHA Hazcom 2012 Hazard Communication labeling.