XEP25 Part B Hardener for EUROPEAN 2K Polyester Finishing Putty

Dominion Sure Seal Ltd

Revision date : 2017-10-27

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS02 GHS07
Health risk rating 4
Safety risk rating 4
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

94-36-0

Name of the chemical

Dibenzoyl peroxide

Concentration

40-50

EC/CAS

131-11-3

Name of the chemical

DMP, Dimethyl-phthalate

Concentration

40-50

Listed in

EC/CAS

7732-18-5

Name of the chemical

Water, distilled, conductivity or of similar purity H2O

Concentration

10-12

General Information

Revision date

2017-10-27

Product name

XEP25 Part B Hardener for EUROPEAN 2K Polyester Finishing Putty

Chemical name

Organic peroxide / Peroxyde organique

1.2.1 Relevant identified uses

Hardener for Polyester Finishing Putty, Part B, 36.5 ml / 1.23 fl oz US

Emergency telephone

CANUTEC : (613) 996-6666

Icons in SDS

GHS02 GHS07

Company Information

company name

Dominion Sure Seal Ltd

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H242, H317, H319

Hazard statements

Code

Statements

H242

Heating may cause a fire

H317

May cause an allergic skin reaction

H319

Causes serious eye irritation

Section 2

2.1 Classification of the substance or mixture

The classification and label elements stated below were prepared in accordance with the USA OSHA Hazard Communication Standard (29 CFR 1910.1200; Hazcom 2012) and the Canadian WHMIS regulations (Hazardous Products Regulations; WHMIS 2015). This information may be different from the actual product label information for labels that are regulated by other agencies.

Health hazards

Eye Irritation, Category 2 Skin Sensitization, Category 1

Physical hazards

Organic Peroxides, Type E

2.2 Label elements

Hazardous components for labelling: Benzoyl peroxide Flame Exclamation mark

Hazard statements

H242: Heating may cause a fire. H319: Causes serious eye irritation. H317: May cause an allergic skin reaction.

Prevention

P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P234: Keep only in original packaging. P261: Avoid breathing vapours. P264: Wash hands thoroughly after handling. P280: Wear protective gloves, protective clothing and eye protection. P272: Contaminated work clothing should not be allowed out of the workplace.

Response

P305+P351+P338 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+P313 If eye irritation persists Get medical advice/attention P302+P352 IF ON SKIN Wash with plenty of soap and water P333+P313 If skin irritation or rash occurs Get medical advice/attention P362+P364: Take off contaminated clothing and wash it before reuse. P370+P378 In case of fire Use dry chemical or foam to extinguish

Storage

P403: Store in a well-ventilated place. P410: Protect from sunlight. P411+P235: Store at temperatures not exceeding 38°C/100°F. Keep cool. P420: Store separately.

Disposal

P501: Dispose of contents/container in accordance with applicable local, regional and/or national regulations.

2.3 Other hazards

No data available Emergency Overview Immediate concerns: Heating may cause a fire. Causes serious eye irritation. Prolonged exposure may cause skin irritation. May cause sensitization by skin contact. Comments: See sections 9 and 10 for more detailed information on physicochemical effects. See section 11 for more detailed information on health effects. See sections 12 for more detailed information on environmental effects. The actual container label may not include the above label elements. The labeling shown above applies to products used solely for industrial / professional use. Consumer products should be labeled in accordance with the Canadian Consumer Chemicals and Containers Regulations and US Consumer Product Safety Commission regulations. Consumer product labeling takes precedence over Canadian WHMIS 2015 and OSHA Hazcom 2012 Hazard Communication labeling.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.